User manual

3 - 12
In addition, the results of a tab on the Find page are also available on that same numbered tab on the
Update, Configure, Statistics and Monitor pages. For example, if you use Tab 1 to search for MS7580
devices, that same list of found devices displays on the first tab of the Update page.
The advantage of multiple tabs on the Find page is that you can perform operations on multiple search
criteria at the same time.
Reset Button
To protect prior Find results, the Find page does not reset automatically if certain fields are changed on
the Admin Setting page. ReM will alert you by turning the Reset button red on the Find page when
changes are saved on the Admin Settings page.
Changes to the following information on the Admin Settings page will make the Reset button on the Find
page display red:
• Subnet Group, Subnet, Network Address, and Subnet Mask
• Location File name
• Tab names
• Enable Automatic Refresh
•Find All
•Log File Size
• Cordless Scanner Refresh Interval
If the Reset button turns red, you can click it to update the current tab of the Find page. However, you
will lose the results of any earlier Find operation on that tab.
Find Page Options
• Click Save Report to generate a CSV file containing the following information about the found devices:
IP address, location, scanner model, firmware version, serial number, primary interface and status. See
Appendix C for more information about ReM Reports.
• Click on a found scanner to display detailed information.
Note: The Enable Automatic Refresh parameter on the Admin Settings page controls whether new
Find results display automatically on other pages (see page 3-6).