User manual

3 - 7
License File A Zip file containing license files for different scanners (see page 3-26).
The name of each license file within the Zip file must be in the following for-
mat:
serialnumber_licensetype.fwz
For example: 123456789_PDF.fwz, 123456789_OCR.fwz,
123456789_2D.fwz. The separator between serial number and license
type must be an underscore. When you save your settings, ReM copies
this Zip file to the ...\Tomcat 6.0\Remote MasterMind folder on the web
server. Only license files with .fwz or .mot extensions are supported.
Monitor/statistics
refresh period
How often Monitor and Statistics page results are automatically updated.
Must be greater than zero. The default is 10 seconds.
Max. Parallel
Threads
The maximum number of threads that can be created at a time. Use this
option to manage network traffic when a large number of scanners are
available for operations. Must be greater than zero.
For example, if there are 100 scanners, performing the pull operation on all
scanners at a time creates 100 threads, which may increase network traf-
fic. By setting a threshold, you restrict the number of threads that can be
started at a time.
Note: This logic is not used for Find operations or for performing a network
scan on the Admin page.
Cordless Scanner
Refresh Interval
How often, in minutes, the ReM client agent requests broadcast informa-
tion from a cordless scanner. Since this request involves polling the
device, which interrupts users for a few seconds, you may want to limit how
often the refresh occurs.
Once you have saved a new Refresh setting, you must perform a Find
operation to activate the new interval. The default is 60 minutes. To deacti-
vate this feature, enter a zero (0).
Configuration
Message
Text message on a client displayed during a pull or push operation to alert
the user that a maintenance process is in progress. The default message
is Operation in Progress. For example:
Firmware
Message
Text message displayed on a client during a firmware update to alert the
user that a firmware process is in progress. The default message is
Operation in Progress.
Log File Size The allowed size of a log file on a remote client (must be greater than zero).
Once you have saved the new setting, you must perform a Find operation
for all clients to activate the new log file size. The default is 4KB.
Parameter Description