User manual

3 - 2
Remote Location
Since ReM is web based, you can access it remotely from other computers on your network by opening
your web browser and typing the IP address of the server followed by :8080/ReM, as shown in the exam-
ple screen below.
Note: The actual IP address will differ depending on your network. (In the example below, the IP
address is 192.168.1.10):
Logging In
To log into ReM, type your user name and password then click Login.
The default value for both Login and Password is admin. You can use the Admin page to change the
admin password and set up other users (see page 3-9). The first time you access ReM as admin, you
must complete the Admin Settings page.
Logging Out
To log out of ReM, simply click Logout (user name), which is displayed on the upper right-hand corner
of all pages except the login screen.
Admin Settings Page
If you are logged in with the user name admin, you can use the Admin Settings page to set up and main-
tain network settings, ReM features, and user information. The page is divided into four sections:
• IP Addresses
• Admin Settings
• Settings Management
• Manage Users