User manual

2 - 8
9. Complete the Licensing Tool fields. License File Path is required, but the other file paths are
optional.
However, if you enter another file path you must also click the corresponding check box.
For Co Processor Path, either of the Flash Co. Proc. check boxes are valid.
10. If you want to save the install profile for use with the ReM Silent Installer, click Save Install
Configuration, select the desired location, then click Save. The ReM Installer creates a file named
ReM.config containing the configuration information you have selected in the installer window. (For
more information, see Silent Installation on page 2-12.)
11. Click Install.
Field Description
Firmware Main Path. Enter the complete path of the firmware file, including file name, or
click to search for a file.
Note: Only files with .hex, .mot, and .fwz extensions will display.
Co Processor Path Enter the complete path of the co-processor firmware file, including file
name, or click to search for a file.
Note: Only files with .hex extensions will display.
Golden Settings Path A golden settings file is a configuration file you can create using soft-
ware such as MetroSet 2
®
.
Enter the complete path of the golden settings file, including file name,
or click to search for a file.
Note: Only files with .mst extensions will display.
License File Path The license file is one encrypted file storing the licensing information
for all scanners that have licenses.
Enter the complete path of the license file, including file name, or click
to search for a file.
Note: Only files with .txt extensions will display.
Golden Settings Click this box if you want the Golden Settings file downloaded to the
scanner during installation.
Flash Main Proc. Click this box if you want the main firmware updated during installa-
tion.
Flash Co. Proc. Click this box if you want the co-processor firmware updated during
installation.
Flash Co. Proc. Boot Click this box if you want the co-processor boot firmware updated dur-
ing installation.