Installation Instructions

Enter the binding mode on
evohome Controller
1
Press and hold Settings for 3 seconds
2
Press the green tick
3
Press ADD ZONE
4
Press the zone you want to add
the Radiator Controller to
5
Rename the zone if required and/
or press the green tick
6
Press RADIATOR VALVE
7
If you want to control the zone temperature
with the evohome Controller (which
needs to be located in that zone)
press YES, otherwise press NO.
Monday 27 April
Living room
21˚ 18˚ 15˚
18˚ 17˚ 23˚
Quick Actions
21˚ 18˚ 17˚
19˚45˚ 17˚ 23˚
Kitchen Bedroom 2
Dining roomHot Water Bedroom 1 Bathroom
12:03
SETTINGS SCHEDULE
1
Step 1: Power up and bind the
Radiator Controller
CONTINUED ON NEXT PAGE
6 Set up your Radiator Controller 6