Installation Instructions

Settings menu
The Radiator Controller has 12 basic settings
(parameters) that can be adjusted if required.
To enter the settings menu
1
Press the button for approximately 5
seconds until LANGUAGE is displayed
2
Turn the adjustment dial to select the desired
parameter (left-hand digit will flash).
3
Press the button to edit the parameter
(right-hand digit will flash)
4
Use the adjustment dial to set the desired
setting and confirm with the button
5
To exit the menu, select exit using the
adjustment dial and confirm with the button
1
HOLD
5 SEC
Advanced settings
10 Set up your Radiator Controller