user manual

Panic Keys

–

Using Panic Keys

Your system may have been programmed to use special keys or combinations of keys

to manually activate emergency (panic) functions. The functions that might be

programmed are: Silent Emergency, Audible Emergency, Personal Emergency, and

Fire.

To activate a Panic Function

Press an active lettered key for at least two seconds.

Press both keys of an active pair at the same time.

A silent emergency will send a silent alarm signal to the central station*, but there

will be no audible alarms or visual displays.

An audible emergency will send a signal to the central station* and sound a loud,

steady alarm at your keypad(s) and at any external sounders that may be connected

(ALARM plus a zone number would also be displayed).

A personal emergency alarm will send an emergency message to the central

station* and will sound at keypad(s), but not at external bells or sirens.

A fire alarm will send a fire alarm message to the central station* and will uniquely

sound at keypad(s) and external bells and sirens (FIRE plus a zone number would

also be displayed).

* If connected