user manual

Arming the System
– 15 –
Using the 3 STAY Key (Arms Perimeter Only, Entry Delay On)
Use this key when you are staying inside, but expect someone to use an
entry/exit door later.
Before Arming close all doors and windows (see CHECKING FOR OPEN ZONES).
1. Enter your security code and press the STAY key.
2. The keypad will beep three times and will display the armed message. The red
ARMED indicator will light.
3. The system will arm. An alarm will sound immediately if a protected perimeter
window or non-entry/exit door is then opened, but you may otherwise move freely
throughout the premises.
Later arrivals can enter through an entry/exit door without causing an alarm, but
they must disarm the system within the entry delay period to avoid sounding an
alarm.
TYPICAL DISPLAY
"ARMED STAY"
ALARM
AWAY
BYPASS
STAY
SUPV NO AC
PHONE TEST
NOT READY
CHIME BAT
FIRE
CHECK INSTANT TAMPER
FIXED-WORD