Operation Manual

www.honeywell.com/security
192 | Embedded Network Video Recorder User Guide
3. Configure the schedule, then click Save.
4. Click Save to save the settings, and then click Save to save the Schedule configuration.
Configuring Local Storage for Schedules
Click Local Storage in the Schedule configuration interface to open the Local Storage
configuration interface.
Figure 5-51 Local Storage Configuration Interface for Schedules
You can see the HDD information, and you can select the read-only / write-only redundancy (if
there is more than one HDD), and formatting.
Configuring the HDD Group Settings
Click HDD Setting in the Schedule configuration interface to open the HDD Setting
configuration interface.
Figure 5-52 HDD Setting Configuration Interface
Select the HDD group in which you want to save the recording.
Table 5-22 Schedule Configurations
Configuration Description
Channel Select a channel from the drop-down list.
Regular Check to enable the Regular schedule mode.
Motion Check to enable the Motion Detection schedule mode.
Alarm Check to enable the Alarm mode.
MD&Alarm Check to enable the MD&Alarm mode.