Operation Manual

www.honeywell.com/security
160 | Embedded Network Video Recorder User Guide
Figure 5-21 Remotely Adding a Device Configuration Window
Table 5-8 Remote - Add Device Configurations
Configuration Description
Device Search Click Device Search, and you can view the device information for
all found devices. You can see the camera’s IP address, port,
device name, manufacturer, and type.
Add Select a device in the list, and then click Add to automatically
connect to the camera and add it to the Added device list. Or you
can double-click a camera in the list to add it to the Added device
list.
Modify Click or any camera in the Added device list to open a
configuration window to change the corresponding channel setup.
Delete Click to delete the remote connection for the corresponding
channel.
Connection Status indicates that the connection was successful.
indicates that the connection was not successful.