Operation Manual

Web Operation | 151
800-18160 - A - 06/2014
Table 5-3 Live View Video Window Controls
Controlling PTZ Camera
Before attempting to control a PTZ camera, ensure that you have properly set the PTZ protocols.
See Configuring PTZ Settings on page 107.
Click the 3D intelligent positioning key (see Figure 5-12), and the system goes back to the Single
screen mode. Drag the mouse in the screen to adjust the section size.
Table 5-4 Live View Video Window Controls
Control Description
Display Device
Information
Shows the following information about the video:
• IP address
• Channel number
• Bit rate
• Decoding mode: Select either M for Main stream or S for sub
stream.
Digital Zoom Click this button and then left drag the mouse in the zone to zoom
in. Right-click the mouse to return to the original viewing status.
Local Record When you click the Local Record button, the system/NVR begins
recording.
The recorded file is saved to the default system folder:
\RecordDownload.
Snapshot Click to take a snapshot of the currently viewed video. All images
are saved to the default system folder: \picture download.
Audio Turn audio On or Off.
Note This control has nothing to do with the system audio setup.
Close Window Close video in the current window.