Operation Manual

Live Viewing | 29
800-21261V3 - A - 05/2016
Image/Relay-out Settings
Configuring Image Settings
Here you can adjust the selected channel’s brightness, contrast, hue, and saturation.
Figure 2-2 Image Settings
1. Click to select one channel’s video. The currently selected channel border turns Green to
indicate it is selected.
2. Click the Image adjustment buttons in Section 8. See LAN Mode Main Window on page 19.
To return the NVR system to default settings, click Reset.
Audio Turn audio On or Off.
Note This control has nothing to do with the system audio setup.
Close Window Close video in the current window.
Table 2-2 Live View Video Window Controls
Control Description
Table 2-3 Image Settings
Setting Description
Adjusts the monitor’s video brightness.
Adjusts the monitor’s video contrast.
Adjusts the monitor’s video hue.
Adjusts the monitor’s video saturation.
Restores the system to its defaults value.