Use And Care Manual

ManualsBrandsHoneywell ManualsHeaters1,500 Watt Heat Genius™ Ceramic Portable Fan Heater

SAFETY FEATURES

TROUBLESHOOTING

Problem Solution

If your Honeywell HeatGenius

Ceramic Heater shuts off

unexpectedly or fails to

operate, one of your heater

safety features may have

been activated to prevent

overheating.

• Be sure it is plugged in and that the electrical outlet is working.

• Check for any obstructions. If you ﬁnd an obstruction, turn the heater

OFF (

) and unplug it.

• Allow the heater to cool completely, then remove the obstruction,

ensuring that the heater has not been damaged in any way. Wait

at least 10 minutes, then re-plug the heater in and follow the

OPERATION instructions.

• Press and hold both Thermostat Control Buttons (

) for three seconds to change between Fahrenheit

and Celsius and back.

It is recommended that the Honeywell HeatGenius

Ceramic Heater be cleaned at least once a month and

before off-season storage.

• Turn Off (

) and unplug heater. Allow unit to cool.

• Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAXES,

POLISHES OR ANY CHEMICAL SOLUTION.

• Before storing, clean the Ceramic Heater using the above-mentioned steps. Wrap the cord around the

unit. Place in its original box and store it in a cool, dry place.

• This heater does not disassemble.

FAHRENHEIT TO CELSIUS

CLEANING AND STORAGE

Model(s) Unit dimensions Amps Unit

Voltage

Max

Watts

Max BTUs

HCE840B /

HCE840BC

10.2” L x 5.6” W x 17.3” H 12.5 120V, 60Hz 1575 5118

PRODUCT SPECIFICATIONS

The Honeywell HeatGenius

Ceramic Heater is equipped with several devices and features for

added protection:

• A four way tip-over switch that disables the heater if it is accidently tipped in any direction. If tipped over,

the unit should be set upright and follow the OPERATION instructions.

• A high temperature safety control prevents overheating. If activated, unplug the device and wait at least

10 minutes for unit to cool. Then plug the heater back in and follow the OPERATION instructions.

• The heater is also equipped with a thermal cut-off fuse that will permanently shut down the heater should

it operate at a highter than normal temperature. If activated, the unit will need to be replaced.

• This heater was created using high quality, heat-resistant plastics and has a Cool Touch handle.