Operation Manual

Document 900.0865 Rev A 17
04/07
SPECIAL Menu Functions
Adding a Camera Title Display
To add a camera title:
1. On the SPECIAL menu, select CAMERA ID and then press SETUP
(MENU).
Figure 6 Adding Camera Title
Menu Item Option Description
1
CAMERA ID OFF
ON!
Sets a name to be displayed on the monitor. See Adding a
Camera Title Display.
2
COLOR AUTO
ON
Sets the camera to either automatic color/black and white
or full-time color mode.
3
SYNC INT
L/L!
Synchronizes the vertical interval sync pulse of your
camera with other equipment to reduce the effect of picture
roll on the monitor.
In Line Lock (L/L) mode you can adjust the phase from
0–270°.
4
MOTION DET OFF
ON!
Detects moving objects on screen, and displays
MOTION DETECTED along with the number of
movements counted.
Allows you to select the area on screen you want to
observe. See Motion Detection Setup.
5
PRIVACY OFF
ON!
Allows you to mask certain areas of the screen from
observation.
6
MIRROR OFF
ON
Produces a horizontal mirror image on screen.
7
SHARPNESS ON!
OFF
Sharpens the image on screen. You can adjust the
sharpness level from 0–31 (excessive sharpening may
cause picture noise to develop).
8
RESET Restores all factory default settings.
9
RETURN! Returns to the main SETUP menu.
CAMERA ID
A B C D E F G H I J K L M
N O P R Q S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
– . 0 1 2 3 4 5 6 7 8 9
" $ CLR POS END
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _