Use and Care Manual

8
2.7 Ice Maker Installation
Tools Required:
• 1/4 inch copper supply line with shut off valve
• 1/4 inch brass compression nut and ferrule
The copper tubing and shut off valve are available in a kit from your local hardware
or plumbing supply store. Coil enough tubing at the back of the unit to allow
movement for cleaning.
Remove a protective cover before connecting the wire of the ice machine in the box.
Screws (x2)
Ice Maker
Steel Clamp (x1)
Plastic Clamp (x2)
Water Valve (x1) Water Inlet Tube (x1)
Screws (x2)
Ice Container
Leveling Bracket
Screw (x1)
Plastic Water
Supply Tubing
Leveling Bracket
(x1)
Unplug the appliance to eliminate the danger of electric shock during
installation, you must unplug the refrigerator from its electrical outlet.