Users Manual

GATEWAY (GW-1000-WE/GW-1000-NWE)

® U.S. Registered Trademark

31-00424 | Rev.10-20

Honeywell Building Solutions

Honeywell

715 Peachtree Street NE

Atlanta, GA 30308

customer.honeywell.com

buildingcontrols.honeywell.com

Professional Installation

• This device must be professionally installed, this

should be noted on grantee.

• To maintain compliance, only the antenna types that

have been tested shall be used, which listed in “Remote

Antenna Part Numbers” on page 6. This device requires

a significant technology engineering expertise towards

understanding of the tools and relevant technology, not

readily available to average consumer. Only a person

professionally trained in the technology is competent.

• This device is not directly marketed or sold to general

public.

Safety Information as per EN60730-1

The GW-1000-WE/GW-1000-NWE Gateway is intended

for residential, commercial, and light-industrial

environments.

The GW-1000-WE/GW-1000-NWE Gateway is an

independently mounted electronic control system with

fixed wiring.

The GW-1000-WE/GW-1000-NWE is suitable for

mounting in fuse boxes conforming with standard

DIN43880, and having a slot height of max. 45 mm.

It is suitable for panel rail mounting on 35 mm standard

panel rail (both horizontal and vertical rail mounting

possible).

The GW-1000-WE/GW-1000-NWE is used for the purpose

of building HVAC control and is suitable for use only in

non-safety controls for installation on or in appliances.

Table 12. Safety Information as per EN60730-1

Electric Shock

Protection

PELV

Pollution Degree Pollution Degree 2, suitable for use

in industrial environments.

Installation Class 3

Overvoltage