Datasheet

2 sensing.honeywell.com
MICRO SWITCH Global Miniature Limit Switches, GLC | GLD | GLE Series
Table 1. Specifications
Characteristic Parameter
Housing material
GLC Series and GLE Series: Electrostatic epoxy coated zinc
GLD Series: High-strength glass re-enforced thermoplastic
Actuators Side rotary, top pin plunger, top roller plunger, top roller lever, top wobble actuator
Termination
0.514 NPT, PG 13,5, 20 mm, PF 1/2, Deutsch style 4-pin connector
other cable/connector options available, contact the Honeywell Representative
Contact options*
GLC metal housing and GLD plastic housing: 1NC/1NO, 2NC, 2NO
GLE metal housing, 1NC/1NO, 2NC, 2NO, 2NC/2NO
Contact type snap-action, slow-action break-before-make (BBM), slow-action make-before-break (MBB), slow action
Contact material silver (standard), gold plated (low-energy applications)
Thermal current (Ith)
10 A
Rated insulation voltage
300 V
Rated impulse voltage
2.5 kV
Sealing NEMA 1, 4, 12, 13; IP66
Operating temperature 40 °C to 85 °C [40 °F to 185 °F]
Mechanical life Up to 10 million cycles
Pollution code 3
Max. actuation frequency 250 operations/minute; 100 operations/minute (wobbles)
Shock 50 g per IEC 60068227
Vibration 10 g per IEC 6006826
Approvals CE, UL, CSA and CCC
1
Conforming to standards CE, EN50047, IEC/EN 6094751; CSA C22.2 #14; UL 508; CCC
1
GB14048.5; EN455452 (GLC/GLE)
*All normally closed contacts are positive opening .
The two contact elements are Zb (electrically separated) except the 2NC/2NO contacts requires same polarity each pole (Za).
1
CCC certification is not available on the GL Series Switches sold within Europe, Middle East, and Africa. Option for CCC certification in these regions is available
upon request.
Table 2. Electrical Rating
IEC 6094751 (EN6094751) AC 15, A300; DC 13, Q300
Silver Contacts Gold Contacts
ac dc
A300
Ue
AC15
Ie
VA Q300
Ue
DC13
Ie
VA 1 V 10 mA min.
50 V 100 mA
max.
Volts Amps Make Break Volts Amps Make Break
120 6 7200 720 125 0.55 69 69
240 3 7200 720 250 0.27 69 69
