Installation Manual

9000-0447 Rev. I
Page 26 of 42
[GAIN ] Type password for level 3:
[ACCESS] 000000
keypad: enters password (shows as “XXX…” on display)
Main
Any selection
(Only opens if adequate access has not
already been obtained)
OK: if password is valid for desired level (or higher), opens
access, logs the event, and continues to next menu. If not,
returns to Main Menu.
[CHANGE ] Level 1, User 1 111111
[PASSWORD] select key in password
keypad: enters new password for specified level and user
Main
Config
Password
<>: scrolls through levels and users.
If current access level is lower than selection, password is
shown as XXXXXX, otherwise as digits.
[DEFINE] AMM Type 43 (Alarm)
[TYPE ] 1: select response
<>: scrolls through available response categories:
• Alarm • Tamper
• Manual Station • Waterflow
• Supervisory
Note that Alarm, Manual Station and Waterflow all produce
alarm response, except Manual Station which may use PAS
(depending on the global PAS settings) and Waterflow
disables silencing.
Main
Config
Inputs
Type
Edit
(If BKSP/EDIT is pressed, and editing is
possible).
OK: accepts the response selection and opens the Edit
Device Type Menu.
[EDIT ] Spark De (__ Alpha, repeat
[TYPE LBL] move, EDIT flip case, OK
Initially, label comes up all underscores.
Main
Config
Inputs
Type
Define Type
(After response category is accepted)
Keypad: enters text via telephone codes. Scrolls through the
numeral’s associated lower case letters, plus the numeral
itself.
Example:
• Press “2” key once for ‘a’, again for ‘b’, again for ‘c’, and
again for ‘2’. Press again to scroll back to ‘a’.
• To change to/from upper case, press “BKSP/EDIT”, or
scrolls to the previous or next letter.
• “BACK” exits to the Add Type menu without making a
change.
• OK accepts new label and exits to the Select Input Type
Menu.
[EDIT 1ST] (____ Alpha key, repeat
[LOC WORD] move, EDIT flip case, OK
Main
Config
Inputs (or Outputs)
Select
Location
Edit
_____________or_________________
Main
Config
System ID
Edit
Keypad: enters text (See Edit Device Type Menu). OK:
accepts new text for selected address.
Error! Entry is not valid. Press BACK, then
change value or press BACK again.
Various
(If OK is pressed when an illegal value
has been entered).