Installation Instructions

90
Galaxy 2 Series Installation Manual
1 = Mobile Nos
1 = Mobile 1
This selects the first mobile user.
1 = Mobile Number
This is a 20 digit telephone number and is the mobile phone number of the recipient of the message.
2 = Event Type
Refer to Table 27. Event types.
3 = Group Map
This option selects the system group or area from which messages will be sent.
2 = Mobile 2
As per mobile 1.
3 = Mobile 3
As per mobile 1.
2 = Centre No
This is a 20 digit telephone number and is the phone number of the SMS centre. This number is provided by
the SMS service provider and will be different for the PSTN line and GSM Module.
3 = Format (PSTN only)
This option allows message formats to be tailored for the message centre being used. The information should
be obtained from the SMS service provider. The following formats are used:
1 = TAP
This is the standard format for the UK. It sends the event log message in full for each event.
2 = UCP (SMS)
This is the format for alpha pagers. It sends the event log message in full for each event.
3 = UCP (Numeric)
This is the format for numeric pagers. It sends the contact ID format message for each event. The layout is as
follows:
ssss/r/ccc/gggg/dd?
ssss = Account number in numeric format.
r = Event activation or restoral. 0 = activation, 1 = restoral.
ccc = Contact ID code.
gggg = Group map showing group numbers 1234. Any missing group replaced with 0, eg 1034 (group 2
missing).
dd? = This is the data accompanying the event. For example, user, zone, peripheral etc. This can vary in
length.
4 = Site ID
This is a 16 character alphanumeric string and is used to identify the panel/site sending the message. If the
format is UCP (numeric), then the site ID is numeric. Only the first four characters are sent out.
56 - Comms (cont’d)