Installation Manual

Ademco Contact ID Format Event Code Description
78
411UDAC Document #51073 Rev. D 12/09/2008 P/N 51073:D
EVENT MESSAGE
System Peripheral Troubles - 330 and 340
330 System peripheral TROUBLE - Sys. Peripheral - #
331 Polling loop open TROUBLE - Polling Loop Open
332 Polling loop short TROUBLE - Polling Loop Short
333 Expansion module failure TROUBLE - Exp. Module Fail - #
334 Repeater failure TROUBLE - Repeater Failure - #
335 Local printer paper out TROUBLE - Printer Paper Out
336 Local printer failure TROUBLE - Local Printer
Communication Troubles - 350 and 360
350 Communication TROUBLE - Communication Trouble
351 Telco 1 fault TROUBLE - Phone Line #1
352 Telco 2 fault TROUBLE - Phone Line #2
353 Long range radio xmitter fault TROUBLE - Radio Transmitter
354 Fail to communicate TROUBLE - Fail to Communicate
355 Loss of radio supervision TROUBLE - Radio Supervision
356 Loss of central polling TROUBLE - Central Radio Polling
Protection Loop Troubles - 370
370 Protection loop TROUBLE - Protection Loop - #
371 Protection loop open TROUBLE - Protection Loop Open - #
372 Protection loop short TROUBLE - Protection Loop Short - #
373 Fire Trouble TROUBLE - Fire Loop - #
Sensor Troubles - 380
380 Sensor trouble TROUBLE - Sensor Trouble - #
381 Loss of supervision - RF TROUBLE - RF Sensor Supervision - #
382 Loss of supervision - RPM TROUBLE - RPM Sensor Supervision - #
383 Sensor tamper TROUBLE - Sensor Tamper - #
384 RF transmitter low battery TROUBLE - RF Sensor Batt. - #
Open/Close - 400
400 Open/Close OPENINGCLOSING
401 Open/Close by user OPENING - User #CLOSING - User #
402 Group Open/Close OPENING - Group User #CLOSING - Group User #
403 Automatic Open/Close OPENING - AutomaticCLOSING - Automatic
404 Late Open/Close OPENING - LateCLOSING - Late
405 Deferred Open/Close Opening not usedClosing not used
406 Cancel OPENING - CancelClosing not used
407 Remote arm/disarm OPENING - RemoteCLOSING - Remote
408 Quick arm Opening not applicableCLOSING - Quick arm
409 Keyswitch Open/Close OPENING - KeyswitchCLOSING - Keyswitch
Remote Access - 410
411 Callback request made REMOTE - Callback RequestedRestore not applicable
412 Success - download/access REMOTE - Successful Access Restore not applicable
413 Unsuccessful access REMOTE - Unsuccessful AccessRestore not applicable
414 System shutdown REMOTE - System Shutdown
415 Dialer shutdown REMOTE - Dialer Shutdown
416 Success - upload/access REMOTE - Successful AccessRestore not applicable
Access Control - 420
421 Access denied ACCESS - Access Denied - User #Restore not used
422 Access report by user ACCESS - Access Gained - User #Restore not used
System Disables - 500 and 510