Use and Care Manual

1
USER MANUAL
For
FHE1 HEPA Filter
Replacement filter for models: HWP4045, HWP5555, HWP5560S
Prior to replacing this filter, be sure to read the user manual for your vacuum cleaner as well
as the instructions below.
To replace the HEPA filter:
1. Turn moter switch off and unplug power cord from the electrical outlet.
2. Remove hose from suction inlet or blower outlet.
3. Remove head from the tank by pulling gently on the clamps on the vacuum head, turn the head upside
down and place on top of the tank.
4. Remove cover plate and fasteners. Figure B, C
5. Remove the HEPA filter. Figure A
6. Insert a new filter. Use only model FHE1 to insure that you have a genuine HEPA filter.
7. Reattach and secure the cover plate, and then attach the vacuum head to the tank.
These filters can be washed by hand with cold water several times. After washing, dry.
NOTE: NEVER MACHINE WASH OR MACHINE DRY FILTERS.
For technical assistance or service parts, contact the Customer Service Department at:
Producteers USA Inc.
811 Overhills Drive, Suite 101
Old Hickory, TN 37138
[e-mail]
Toll free phone: [phone] Monday – Friday, 8:00AM to 5:00PM, Central Time