Install Instructions

WIRING

f. Attach the quick connect terminals to the furnace EAC-1 and EAC-2 spade connections, which are

polarity neutral.

g. Attach the ground ring to furnace chassis ground.

The 1625/2025NOTE: Honeywell Enhanced Air Cleaner is to be powered by 120 VAC at 60 Hz.

The Honeywell Enhanced Air Cleaner should only be powered when airow is present. The furnace NOTE:

control EAC spade connections provide power only when the furnace blower is operating. If EAC

connections are not available, an alternative airow sensing mechanism must be used to ensure the

Honeywell Enhanced Air Cleaner is only powered when airow is present. Contact a local Honeywell

distributor for information on alternative airow sensors.

Wiring the 1625/2025 (Furnace) Honeywell Enhanced Air

Cleaner

Before proceeding to Startup and Operation on page 19:

I wired the Honeywell Enhanced Air Cleaner as instructed.

1625/2025 Wiring is complete. Go to page 19.

TrueCLEAN™ Enhanced Air Cleaner 68-0308EFS—01