User Guide
Table Of Contents
F200 CHARGED-MEDIA AIR CLEANER
9 68-0238EF—03
Table 1. AIRWATCH® Indicator LCD Description.
AIRWATCH® Indicator Condition Meaning/Action
No indicator on. AIRWATCH® has no power; replace battery in AIRWATCH®
On/Battery indicator on continuously. AIRWATCH® is functioning normally.
On/Battery indicator flashing. Flashing two seconds on, six seconds off: Replace battery in the RF door.
Do not press any reset buttons after battery change.
Flashing two seconds on, two seconds off: Replace battery in AIRWATCH®.
Do not press any reset buttons after battery change.
Flashing alternates between two seconds on, six seconds off; then two
seconds on, two seconds off: Replace the batteries in both units. Do not
press any reset buttons after battery change.
Air Cleaner indicator flashing. Signal was received from transmitter, indicating either excessive pressure
drop or 12-month timer has expired. Replace filter and press reset button
inside RF door. See Fig. 2.
UV Air Treatment indicator flashing or
Humidifier indicator flashing.
UV lamp(s) or humidifier pad needs replacing. Replace parts.
On the AIRWATCH®, push and release button until desired device indicator
is flashing. Then press button again and hold until indicator comes on
continuously; then release.
All indicators flashing. System is in checkout mode. Indicators flash for two minutes, then
AIRWATCH® automatically resets.