Manual

Chapter 6: Configuring Terminal
User Guide for ScanPal Series Terminal
55
Suggestions
Automatically recommend quick access through intelligent pre-judgment of user’s needs.
Wireless & networks
Settings Introductions
Wi-Fi
To enable or disable Wi-Fi radios. When Wi-Fi is enabled,
available Wi-Fi networks can be viewed by taping this bar.
Mobile data (only
supported by
RDA70-3
WWAN)
(This menu will be displayed after inserting SIM card) Enable or
disable mobile data. When it is enabled, tap the bar to view
available mobile network).
Bluetooth
To enable or disable Bluetooth radios. When Bluetooth connection
is enabled, Bluetooth-enabled devices within the range can be
viewed by tapping this bar.
Data usage
Displays the current usage of flow rate, including Wi-Fi and
Cellular data. (Cellular data will displayed after sim card is
inserted).
More...
Airplane mode: to enable or disable Airplane mode.
Wi-Fi Calling: to telephone through Wi-Fi network after it is being
enabled.
NFC: enabling NFC allows NFC tag information to be read when
the terminal touches NFC tag.
Android Beam: when NFC is enabled, this function allows users to
send the application contents from the terminal directly to another
NFC-supported device when the two get closer.
Tethering & Portable Hotspot: a handheld device can be used as a
wireless router to radiate the wireless network, and then other
WLAN-enabled device can receive it (only supported by EDA70-3
WWAN).
VPN: Set a password for accessing the virtual private network.
Cellular Networks: mobile network setting (only supported by
EDA70-3 WWAN)
Mobile Plan: plans provided by network carriers.
Network Settings reset: reset all network setting.