Cordless Drill User Manual

11
MODEL UC12Y UC14YF / UC14YF2
Input power source Single phase: AC 120V 60 Hz
Charging time EB12 ....... Approx. 60 min. EB12....... Approx. 45 min.
(At a temperature of 68° (F20°C)) EB12B .... Approx. 60 min.
Charging voltage DC 2.4 – 12V DC7.2 – 14.4V
Charging current DC 1.3A DC 1.9A
Weight 2.9 lbs. (1.3 kg) 2.9 lbs. (1.3 kg)
Motor DC Motor
No-load speed 0 – 800 rpm
Capacity Drilling
Wood .................................................................9/16'’ (15 mm)
Metal ...................................................................3/8'’ (10 mm)
Screw Driver
Wood screw ....................... #11 × 1–3/8'’ (5.1 mm × 35 mm)
Drill chuck capacity Maximum gripping diameter 3/8'’ (10 mm)
Battery
EB9 (1.3 Ah)
Nickel cadmium battery
Voltage ............................................................................ DC9.6 V
Charging & discharging frequency
EB9B (2.0 Ah)
UC12Y ............................about 500 times
UC14YF / UC14YF2 ...... about 1000 times
Weight 3.3 Ibs (1.5 kg)
2. Battery Charger
2. Battery Charger
Body
Cord
Battery
Installation Hole
Nameplate
Pilot Lamp
< UC12Y > < UC14YF / UC14YF2 >
Fig. 2
SPECIFICATIONS
1. Cordless Angle Drill (DN10DY)
Pilot Lamp
Cord
Battery Installation Hole
Caution
Plate
Body
Nameplate