Preliminary Draft, Not for Release, For Review Purposes Only DEX Adapter Model DEX-BLE-10 Quick Start Guide DEX-BLE-EN-QS-01 Rev A 8/20 Preliminary Draft, Not for Release, For Review Purposes Only
Preliminary Draft, Not for Release, For Review Purposes Only Out of the Box Make sure that your shipping box contains these items: • DEX wireless adapter (Model DEX-BLE-10) • Rechargeable 3.7 VDC Li-ion battery (Model DEX-10-BATTERY) • USB charge cable, type A to micro B • Power adapter with regional plug • Regulatory Sheet If any of these items are missing or appear damaged, contact your Customer Account Representative.
Preliminary Draft, Not for Release, For Review Purposes Only Adapter Features Belt Clip On/Off Power Buttons Bluetooth Connection Status Indicator DEX Cable Battery Charge Status Indicator Battery Cover T5 Torx® Screw NFC Antenna Micro USB Cover Preliminary Draft, Not for Release, For Review Purposes Only 3
Preliminary Draft, Not for Release, For Review Purposes Only About the Battery The DEX-BLE-10 ships with an installed Li-ion 3.7 VDC, 750 mAh battery manufactured for Honeywell International Inc. The operating temperature is -20°C (-4 °F) to 60°C (140 °F) Use only Honeywell Li-ion battery pack model DEX-10-BATTERY. Utilisez uniquement des batteries Honeywell Li-ion modèle DEX-10-BATTERY. Ensure all components are dry prior to placing the battery in the DEX-BLE-10.
Preliminary Draft, Not for Release, For Review Purposes Only USB Charge Cable The USB cable provides two options for charging the DEX wireless adapter. Note: The micro USB connector on the DEX-BLE-10 only supports charging the battery and cannot be used for data transfer. Option 1: Charging From a Power Outlet Use only a UL Listed power supply that has been qualified by Honeywell with an output rated at 5VDC and 2A with the device.
Preliminary Draft, Not for Release, For Review Purposes Only Option 2: Charging From a USB Port on a Host Device Ensure all components are dry prior to mating the DEX-BLE-10 and battery with peripheral devices. Mating wet components may cause damage not covered by the warranty. Assurez-vous que tous les composants sont secs avant de connecter le DEX et la batterie à les périphériques. L’insertion de composants humides risque de provoquer des dommages non couverts par la garantie.
Preliminary Draft, Not for Release, For Review Purposes Only Turn Power On/Off To turn the DEX-BLE-10 on, press the “ON” button. To turn the DEX-BLE-10 on, press the “OFF” button. Note: The DEX-BLE-10 automatically powers OFF after 5-minutes of inactivity. Connect the DEX-BLE-10 The DEX adapter easily connects to direct store delivery (DSD) DEX/UCS store systems and Vending Machines. 1. Turn ON the DEX-BLE-10. 2. Pull the connector out of the molded side cavity of the adapter. 3.
Preliminary Draft, Not for Release, For Review Purposes Only Pair the DEX-BLE-10 with a Mobile Computer The DEX Wireless Adapter supports Honeywell devices on Android 6 and higher. To pair the DEX-BLE-10: 1. Verify the mobile computer is turned on and Bluetooth and NFC are enabled. 2. Turn ON the DEX-BLE-10. 3. Place the DEX-BLE-10 back to back with the mobile computer. The NFC antenna is on the back of the DEX wireless adapter. The mobile computer initiates the pairing process with the adapter. 4.
Preliminary Draft, Not for Release, For Review Purposes Only Bluetooth Communication Status The blue LED indicates the communication between the DEX-BLE-10 and another device using Bluetooth™ technology. Blue LED Status Bluetooth Communication Status Solid Not paired, but discoverable to other devices. Fast Flash Attempting connection with other device. Slow Flash Connection established with other device.
Preliminary Draft, Not for Release, For Review Purposes Only Battery Status The green LED indicates the status of the battery charge. Note: The LED behavior differs if the DEX-BLE-10 is connected to an external power source (e.g., power cable and wall charger) instead of using battery power.
Preliminary Draft, Not for Release, For Review Purposes Only Battery Removal 1 2 3 Preliminary Draft, Not for Release, For Review Purposes Only 11
Preliminary Draft, Not for Release, For Review Purposes Only 3 4 Preliminary Draft, Not for Release, For Review Purposes Only 12
Preliminary Draft, Not for Release, For Review Purposes Only Support To search our knowledge base for a solution or log into the Technical Support Portal and report a problem, go to www.hsmcontactsupport.com. Documentation Product documentation is available at www.honeywellaidc.com. Limited Warranty For warranty information, go to www.honeywellaidc.com and click Resources > Product Warranty. Patents For patent information, see www.hsmpats.com.
Preliminary Draft, Not for Release, For Review Purposes Only This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII. Copyright © 2020 Honeywell International Inc. All rights reserved.
DEX10-ML-RS-01 Rev A Honeywell DEX Wireless Adapter Agency Models: DEX-BLE-10 Publicly downloadable certificates are available at www.honeywellaidc.com/compliance. Les certificats téléchargeables accessibles au public sont disponibles à www.honeywellaidc.com/compliance. Les certificats téléchargeables publiquement sont disponibles sur www.honeywellaidc.com/compliance. I certificati pubblicamente scaricabili sono disponibili sul sito Web www.honeywellaidc.com/compliance. Zertifikate stehen unter www.
