User Manual

Installing the Charge Rack
4-18
DIAD 6 Charge Rack Manual
8. Pull each six-port charge bay forward and disconnect the power cord to expose the mounting
holes. Be sure to retain your Phillips screws to reinstall the six-port charge bays after the rack
has been mounted.
Disconnect the power
supply harness from the
power distribution
board and set the bays
aside in a clean work
area.
9. Install the side guard rails. Attach the side guard rails to each side of the DIAD 6 Charge Rack
using 2 Phillips screws and the 3M adhesive strips supplied with each guard rail.
DIAD 6 Rack left side rail