User Manual

Installing the Charge Rack
4-12
DIAD 6 Charge Rack Manual
Item (Quantity)
Part Number
4/8”x1”x14 ga. Flat Washer (10)
By Local P.E.
1/4” Molly Bolt (4)
By Local P.E.
Use Existing Bolts from DIAD 5 Uninstall
From Uninstall
Tools
Before attempting to install the DIAD Charge Rack, you must have the following tools:
• 1/8” Blade, 2” Shaft Screwdriver
• 3/8” Drill and Appropriate Bit (see page 4-15)
• 9/16” Wrench or Socket
• Tape Measure
• Level
• Stud Sensor
• Large Straight Blade Screwdriver
• Phillips Screwdriver