User Manual

Installing the Charge Rack
4-9
DIAD 6 Charge Rack Manual
9. Insert the four 3/8” x 1” Hex Head bolts through the 3/8” x 1 flat washers. Then place through
the mounting holes in sections one and five of the Charge Rack and into the u-channel spring
nut. Hand-tighten and repeat for all four locations, then torque down all bolts to 40 in lbs. with
appropriate wrench or socket. Use care not to over-torque the bolts. Check to make sure the
Charge Rack is level.
Charge Rack Mounting Holes