Quick Start Guide
Table Of Contents
- CW45
- Agency Models
- Out of the Box
- Computer Features
- About the Battery
- Assemble the Mount and Arm Strap
- Charge the Mobile Computer
- Turn Power On/Off
- Battery Replacement
- Screen Timeout
- Navigation and Function Buttons
- About Provisioning Mode
- Scan a Barcode with the Scan Demo
- Sync Data
- Restart the Mobile Computer
- Compliance Version
- Support
- Documentation
- Limited Warranty
- Patents
- Trademarks
- Disclaimer
17
Scan a Barcode with the Scan Demo
For optimum performance, avoid reflections by scanning the
barcode at a slight angle.
1. Swipe up on the screen.
2. Select Demos > Scan
Demo.
3. Point the computer at
the barcode.
4. Touch Scan on the
screen.
The decode results appear
on the screen.
Note: In the Scan Demo app, not all barcode symbologies are
enabled by default. If a barcode does not scan, the correct
symbology may not be enabled. To learn how to modify the
default app settings, see the user guide.
Sync Data
To move files between your CW45 and a computer:
1. Connect the CW45 to your computer using a
communication accessory.
2. On the CW45, swipe down from the top of the screen to see
the notifications panel.
3. Touch the Android System notification twice to open the
options menu.
DRAFT