Quick Start Guide
Table Of Contents
- CW45
- Agency Models
- Out of the Box
- Computer Features
- About the Battery
- Assemble the Mount and Arm Strap
- Charge the Mobile Computer
- Turn Power On/Off
- Battery Replacement
- Screen Timeout
- Navigation and Function Buttons
- About Provisioning Mode
- Scan a Barcode with the Scan Demo
- Sync Data
- Restart the Mobile Computer
- Compliance Version
- Support
- Documentation
- Limited Warranty
- Patents
- Trademarks
- Disclaimer
16
F3 Button
Out of the box, the F3 button has been remapped to Scan so
that you can use a configuration barcode during setup. To clear
the remapping and return the F3 button to its default (Enter),
scan the barcode below or use Keyremap. (Refer to the CW45
User Guide for more information about Keyremap.)
Note: Performing a Factory Reset will remap the F3 key back to
Scan.
About Provisioning Mode
After completing the out-of-box set up process, Provisioning
mode is automatically turned off. Scanning a barcode to install
applications, certificates, configuration files, and licenses on
the computer is restricted unless you enable Provisioning mode
in the Settings app. To learn more, see the user guide.
DRAFT