CT40 Series powered by Android™ Quick Start Guide CT40-A-EN-QS-01 Rev E 06/20
Out of the Box Make sure that your shipping box contains these items: • Mobile Computer Model CT40-L0N, CT40-L1N, CT40P-L0N, or CT40P-L1N • Rechargeable Li-ion battery (see page 7) • Hand strap • Product documentation If you ordered accessories for your mobile computer, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the mobile computer for service. Note: CT40-L0N/CT40P-L0N models do not include a WWAN radio.
Mobile Computer Features Speaker Scan Status LED Battery Status/ Notification LED Touch Panel Imager Window (LED/Laser Aperture) Microphone Front Facing Camera (model dependent) Power Button Push-to-Talk Button (model dependent) Scan Button Scan Button Microphone Speaker 2
Note: Hand strap not shown.
Battery Latch (Model CT40-xxx-xxxxx0x) Battery Latch (Models CT40-L0N-xxxxxAx, CT40-xxx-xxxxxBx, CT40-xxx-xxxxxHx, CT40P-L0N-xxxxxAx, CT40P-xxx-xxxxxBx, CT40P-xxx-xxxxxHx) Battery (Refer to page 7) 4
Install a microSD Card (Optional) Note: Format the microSD card before initial use. 1 2 4 5 Note: 3 Always power off the computer before attempting to install or remove a card.
Install a microSIM Card Note: Phone feature is only available on CT40-L1N/CT40P-L1N models. On all models, the SIM slot supports use of a UICC card for NFC Secure Element NFC link encryption. 1 2 4 5 Note: 3 Always power off the computer before attempting to install or remove a card.
About the Battery The mobile computer ships with a Li-ion battery manufactured for Honeywell International Inc. Model Configuration Battery P/N Power CT40-xxx-xxxxx0x 318-005-011 3.8 VDC, 15.5 watt-hour CT40-xxx-xxxxxHx 318-055-017 3.8 VDC, 15.5 watt-hour CT40-LON-xxxxxAx 318-055-015 3.85 VDC, 15.5 watt-hour CT40P-xxx-xxxxxHx TBD 3.85 VDC, 15.5 watt-hour CT40P-L0N-xxxxxAx 318-055-067 3.85 VDC, 15.
Install Battery (Model CT40-xxx-xxxxx0x) 1 4 2 3 5 8
Install Battery (Models CT40-LON-xxxxxAx, CT40-xxx-xxxxxBx, CT40-xxx-xxxxxHx, CT40P-L0N-xxxxxAx, CT40P-xxx-xxxxxBx, CT40P-xxx-xxxxxHx) 2 1 9
Install the Hand Strap 1 2 3 4 10
Charge the Mobile Computer The mobile computer ships with a partially charged battery. Charge the battery with a CT40 series charging device for a minimum of 4 hours. Using the computer while charging the battery increases the time required to reach a full charge. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.
Turn Power On/Off The first time you power on the computer, a Welcome screen appears. You can either scan a configuration barcode or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning mode is automatically turned off (disabled). To turn the computer on: • Press and hold the Power button for approximately 3 seconds, and then release. To turn the computer off: 1.
1. Press and hold the Power button until the options menu appears. 2. Touch Swap Battery and follow the on-screen instructions. 3. Once you replace the battery, press the Power button. Sleep Mode Sleep mode automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time. 1. Press and release the Power button to wake the computer. 2. Drag the computer.
About the Home Screen Notification / Status Bar Home Screen Panel Favorites Tray Search Bar Navigation Buttons To learn how to customize the Home screen, see the user guide.
Navigation and Function Buttons Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Scan Touch the front (on-screen) Scan button to trigger the scanner. Volume Press the top of the button to raise the speaker volume. Press the bottom of button to lower the speaker volume. Scan Press left or right Scan button to trigger the scanner. Power See page 13. Push-to-Talk Push-to-Talk button is model dependent.
About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a barcode to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Barcode with the Scan Demo For optimum performance, avoid reflections by scanning the barcode at a slight angle. 1. Swipe up on the screen. 2. Select Demos > Scan Demo.
Sync Data To move files between your CT40 and a computer: 1. Connect the CT40 to your computer using a USB charge/ communication accessory. 2. On the CT40, swipe down from the top of the screen to see the notifications panel. 3. Touch the Android System notification twice, to open the options menu. 4. Select either File Transfer or PTP. 5. Open the file browser on your computer. 6. Browse to the CT40.
Restart the Mobile Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. 1. Press and hold the Power button until the options menu appears. 2. Select Restart. To restart the computer if the touch panel display is unresponsive: • Press and hold the Power button for approximately 8 seconds until the computer restarts. Note: To learn about advanced reset options, see the user guide.
Limited Warranty For warranty information, go to www.honeywellaidc.com and click Resources > Product Warranty. Patents For patent information, see www.hsmpats.com. Trademarks Android is a trademark of Google LLC. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.
CT40XP-ML-RS-01 CT40 XP Mobile Computer Agency Models: CT40P-L0N, CT40P-L1N Publicly downloadable certificates are available at www.honeywellaidc.com/compliance. Les certificats téléchargeables accessibles au public sont disponibles à www.honeywellaidc.com/compliance. Les certificats téléchargeables publiquement sont disponibles sur www.honeywellaidc.com/compliance. I certificati pubblicamente scaricabili sono disponibili sul sito Web www.honeywellaidc.com/compliance. Zertifikate stehen unter www.
CT40XP-ML-RS-01 L’équipement est prévu pour une utilisation dans les pays de la Communauté européenne. Plages de fréquences de fonctionnement : 802.11a/b/g/n/ac, Bluetooth et NFC Modèle: CT40P-L0N • 13-14 MHz (NFC): PIRE -5,57 dBµA/m @10 m • 2 400 à 2 483,5 MHz (réseau personnel Bluetooth) : PIRE 9,69 dBm • 2 400 à 2 483,5 MHz (Bluetooth à basse énergie) : PIRE 1,32 dBm • 2 400 à 2 483,5 MHz (WLAN IEEE 802.
CT40 XP Mobile Computer Bu donanım, Avrupa Birliği ülkelerinin tümünde kullanılabilir. Çalışma Frekans Aralıkları: 802.11a/b/g/n/ac, Bluetooth ve NFC Modeller: CT40P-L0N • 13 - 14 MHz (NFC): -5,57 dBµA/m @10 m EIRP • 2400 - 2483,5 MHz (PAN Bluetooth): 9,69 dBm EIRP • 2400 - 2483,5 MHz (Bluetooth Düşük Enerji): 1,32 dBm EIRP • 2400 - 2483,5 MHz (WLAN IEEE 802.11b/g/n): 17,11 dBm EIRP • 5150 - 5350 MHz, 5470 - 5725 MHz ve 5725 - 5850 MHz (WLAN/RLAN IEEE 802.
Model CT40P-L1N Hearing Aid Compatibility (HAC) The standard for compatibility of digital wireless devices with hearing aids is set forth in American National Standards Institute (ANSI) standard C63.19. ANSI C63.19 contains these two sets of standards: • An “M” rating from M1 to M4 for reduced radio frequency (RF) interference to enable acoustic coupling with hearing aids that do not operate in t-coil mode. • A “T” rating from T1 to T4 to enable inductive coupling with hearing aids operating in t-coil mode.
