Operation Manual

20
Error Indications
To save battery power, CS92A will indicate
error conditions on the LoT™ Display of
ST9120C. It is possible to view the CS92A sta-
tus by pressing the button on the transceiver
box. The lights underneath this button will
provide feedback as shown in the table. Go
to the FAQ AND TROUBLSHOOTING section
for more information.
Green Light Red Light Status
On Flashes up to 5 times in
succession, then repeats
Everything is OK, red light shows signal
strength - press button again to exit
Off Flashes 0.1 s on, 0.9 s off Battery low condition, replace batteries
Off Flashes 0.5 s on, 0.5 s off Sensor error, check sensor connection
Off On continuously Loss of communications