Use and Care Manual

TIMERSWING

POWER

SPEEDCOOL

USE & OPERATION

TOUCH SCREEN CONTROL PANEL

FUNCTION BUTTONS

POWER

Touch the button to turn the unit on. The cooler will start automatically at high speed. After a few

seconds the speed will switch to low. To turn the unit off, press the power button for 2 seconds or longer.

NOTE: The Control Panel uses soft-touch control. Operate the air cooler by touching the buttons of the

Touch Screen Control Panel.

TIMER

Touch the TIMER button until the desired time duration setting is selected. When the set time

has passed, the unit will automatically turn off (unit remains in Standby mode until power cord is

unplugged from electrical socket). The TIMER function allows you to program the unit for up to 8 hours

of use.

SPEED

Touch the SPEED button repeatedly to change the speed between High and Low. The display will show

the selected speed.

COOL

Touch the COOL button until it is illuminated on the display. This activates evaporative cooling.

The water pump will operate and you will feel the cooler air after the Honeycomb Cooling Media

is completely wet. When COOL is not illuminated, the unit switches to a fan only mode, without

evaporative cooling.

SAFETY LOCK

To avoid accidentally touching and changing the set air cooler settings, you can touch both the

POWER + COOL buttons at the same time to lock the control panel. Touch both POWER + COOL at the

same time again to unlock the control panel buttons.

SWING

Touch the SWING button until the SWING indicator light is illuminated on the control panel. The

louvers will begin to move left to right automatically.

Vertical Air Flow - You can manually adjust the louvers to change vertical air ﬂow.