Operation Manual

16
TROUBLESHOOTING GUIDE
No discharge of air Cord is not plugged in.
Supply switch in ON.
Power is not on. Turn the unit ON by pressing
buttons on the control panel.
Not Cooling / Unit is
making noise
Pump is not turned ON.
On Control Panel, Turn COOL
FUNCTION to “ON”
Low or no water in tank,
when COOL is selected.
Refill water tank.
Odour omission When the Cooler is new.
When the unit is used for the
first time, the Honeycomb
Cooling Media will have an
odor, which will dissipate
within a week of initial use.
If the Cooler has been used. There may be an algae issue,
Replace the honeycomb Cooling
Media. Contact service centre.
Damaged Pump or Calcium
deposits on blower.
Contact service center.
PROBLEM POSSIBLE CAUSE SOLUTION