Portable Evaporative Air Cooler INSTRUCTION MANUAL Read and save these instructions before use www.ushainternational.com Downloaded from www.Manualslib.
Quick Start Guide Fill with water and plug into standard power outlet. Note : Please make sure that the power outlet is set to correct settings as per product specifications. Place near open door or window. Note : Evaporative Air Coolers work on evaporative cooling mechanism which requires cross ventillation. Turn ON and enjoy the cooling breeze. Note: Start with LOW speed and gradually increase to higher speed for optimum cooling performance. Downloaded from www.Manualslib.
INDEX Read all instructions carefully before setting up and operating the unit, and please keep this instruction manual for future reference. This manual is designed to provide you with important information needed to setup, operate, maintain, and troubleshoot your cooler. Failure to follow these instructions may damage and/or impair its operation and void the warranty. SECTION 1. 2. 3. 4. 5. 6. 7. 8. 9. PAGE THANK YOU .....................................................................................
THANKYOU Dear Customer, Congratulations! You are now the proud owner of an Usha Honeywell Evaporative Air Cooler. Innovatively designed, using only the highest quality material and components, your Usha Honeywell Air Cooler is designed for years of trouble free performance. Please read this Instruction Manual carefully before using the product and keep it carefully after reading for future reference.
USER TIPS NATURAL ENERGY EFFICIENT COOLING Evaporative air cooling is the natural way of cooling, similar to a breeze blowing across a lake. This breeze drops the temperature and has a relaxing cooling effect. The evaporative air cooler cools the air by means of the evaporation of water. When water evaporates into the air, the result is a mixture of air and water molecules. This chemical change requires heat which is taken from the water molecules, resulting in cooler air propelled from the unit.
USER TIPS The recommended maximum relative humidity level is 60% or less, which allows a noticeable temperature decrease. The temperature decrease will be greater in drier climates because higher evaporation occurs when humidity is low. The evaporative air cooler should not be used in enclosed spaces. It must be kept level and there must be water in the water tank. The room should have doors and windows opened to allow free air flow.
SAFETY RULES READ AND SAVE THESE INSTRUCTIONS: When using electrical appliances, basic safety precautions should always be followed: • Your cooler runs on 230V AC, 50 Hz current. Check the household voltage to ensure it matches the appliance's rate specification. • Before operating the product remove it from its packaging and check it is in good condition. • DO NOT operate any product with a damaged cord or plug. We recommend not to use an extension cord with this appliance.
SAFETY RULES • DO NOT attempt to repair or adjust any electrical or mechanical functions of the cooler, as this may void the warranty. • DO NOT cover the air inlet or outlet on the appliance as this may cause motor damage. • DO NOT insert or allow objects to enter any ventilation or exhaust opening as this may damage the product and could cause an electrical shock or fire. • DO NOT operate with the Honeycomb media removed as this will overload and damage the motor.
PARTS DESCRIPTION 9 1 2 10 3 4 13 8 7 12 5 6 11 1 2 3 4 5 6 7 Water / Ice Inlet Handle Right Panel Lever for Horizontal Louvers Water Tank Castors Horizontal Louvers 8 Water Level Indicator 9 Control Panel 10 Left Panel 11 Drain Plug 12 Water Fill Door (Manual Water Inlet) 13 Back Panel 7 Downloaded from www.Manualslib.
USE & OPERATION FILL WATER ( Manually ) Open (Slide-out) the water fill door located on the backside of the unit and fill water inside the tank. Optionally, you may also fill water or load ice from the water/ice inlet located on the top besides the control panel. Loading the ice in the ice inlet compartment, will help to improve the cooling efficieny. Check Max. Level of water on the Water Level Indicator. Always check water level in the tank before running the "COOL" function.
USE & OPERATION CONTROL PANEL NOTE: Speed control may be marked as High / Med / Low in certain units. 9 Downloaded from www.Manualslib.
USE & OPE RATIO N CONTROL KNOBS SPEED / ON - OFF Connect to the power supply and turn the Speed knob. The fan will start. Change the speed from 1 for Low to 2 for Medium to 3 High. To switch OFF the unit turn the Speed to "0". 0 3 2 1 SPEED COOL Turn the Cool knob ON to start the cooling. It takes a few minutes to obtain the full effect from this mode. SWING Vertical Louvers Turn the SWING knob to 'ON'. The louvers will begin to move from right to left automatically.
CLEANING & MAINTENANCE WARNING • Before cleaning the unit, switch it to the ''off'' position and remove the plug from • • • the power socket. To clean the outside, use a damp cloth to remove dirt and dust. Never use detergents, corrosive elements or any chemicals to clean this product. When the product is not in use, store the unit in a dry place out of direct sunlight. CLEANING AND DRAINING THE WATER TANK • Turn the power "off" and disconnect the unit from power supply.
CLEANING & MAINTENANCE MAINTAINING & CHANGING THE HONEYCOMB • • • • • The appliance is supplied with Honeycomb cooling media. The cleaning frequency for the Honeycomb media depends on local air and water conditions. In areas where the mineral content of water is high, mineral deposits may build up on the honeycomb cooling media and restrict air flow. Draining the water reservoir and refilling with fresh water at least once a week will help reduce mineral deposits.
TROUBLESHOOTING GUIDE: PROBLEM POSSIBLE CAUSE SOLUTION No discharge of air Cord is not plugged in. Make sure power cord is plugged in and the supply switch in ON. Power is not ON. Try to turn the unit ON by pressing buttons on control panel or remote control. Pump is not turned ON. Turn on COOL function from remote or control panel. Low or no water in tank, when COOL is selected. Refill water tank. Damaged Pump or Calcium deposits on blower. Contact service centre. New Unit.
TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE SOLUTION The unit does not respond Remote control batteries. Check batteries, Replace if needed. Try to operate using the control panel. Damaged PCB Try with remote control. If the unit responds, PCB board fasteners may be loose. Contact service centre. If neither remote control nor control panel works, PCB board may be damaged. Contact service centre. 14 Downloaded from www.Manualslib.
TECH NICAL SPEC IFICA TION S MODEL NO. Voltage Frequency Wattage Water Tank Capacity Cooling Media Product Dimension (L) x (W) x (H) Net Weight CL48PM 230V 50Hz 140 Watts 40 Litres Honeycomb 600 x 490 x 830 mm 13.3 Kg 15 Downloaded from www.Manualslib.
ELECTRICAL WIRING DIAGRAM 16 Downloaded from www.Manualslib.
SERVICE AND WARRANTY SERVICE AND WARRANTY This appliance is warranted for one year against all manufacturing defects from the date of sale. In the event of any complaint, please contact your nearest Company Service Centre or call at our Toll Free no: 1800-1033-111 This Warranty is valid only when… 1. The appliance has not been opened or tempered with, by any unauthorized person. 2. The warranty card or cash memo duly signed by the authorized dealer are presented with the complaint. 3.
