Operation Manual
USE & OPERATION
ROOM COOLING AND HUMIDIFYING
Water Regulator
COOLER LOCATION
11
Place the cooler in front of an open door or window. Ensure that there is adequate cross -
ventilation in the room by leaving a door or window open opposite from the cooler.
Following these rules will ensure your cooler will work as effectively as possible.
When the Water Regulator is set to ''MIN'', the water pump
distributes minimal amount of water to the Honeycomb
Media. This results in less water evaporation and reduces
cooling effect.
When the Water Regulator is set to ''MAX'', the water pump
distributes the maximum amount of water to the Honeycomb
Media. This results in maximum water evaporation and the
cooling performance improves.