Dolphin™ CK65 powered by Android™ Quick Start Guide CK65-A-EN-QS-AG Rev (a) 3/18
Out of the Box Make sure that your shipping box contains these items: • CK65 mobile computer (Model CK65L0N) • Rechargeable 3.7 VDC Li-ion battery • Hand strap • Product documentation If you ordered accessories for your mobile computer, verify that they are also included with the order. Be sure to keep the original packaging in case you need to return the mobile computer for service.
Mobile Computer Features Imager (LED / Laser Aperture Touch Panel Ambient Light Sensor Notification/Scan/ Battery Status LEDs Power Button Scan Button Keyboard (model dependent) Microphone Keyboard Status LEDs (model dependent) 3
Camera Lens and Flash Laser Safety Label Location Hand Strap Scan/Aux Button Scan/Aux Button Battery Latch (under hand strap) I/O Connector MicroSD Card Door (battery and hand strap removed) 4
Install a microSD Card (Optional) Always power off the computer before attempting to install or remove a card. See Install the Battery for hand strap release information. Format the microSD card before initial use.
Install the Battery The CK65 mobile computer ships with a Li-ion 3.7 VDC, 18.9 watt-hour battery manufactured for Honeywell International Inc. Use only Honeywell Li-ion battery pack models CK65-BTSC, AB17, AB18, and 1001AB01. 3 1 2 4 Ensure all components are dry prior to placing the battery in the computer. Mating wet components may cause damage not covered by the warranty.
Charge the Mobile Computer The CK65 mobile computer ships with a partially charged battery. Charge the battery with a CK3 Series charging device for a minimum of 4 hours. Using the computer while charging the battery increases the time required to reach a full charge. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.
Turn Power On/Off The first time you power on the computer, a Welcome screen appears. You can either scan a configuration bar code or use the Wizard to manually set up the computer. Once setup is complete, the Welcome screen no longer appears on startup and Provisioning mode is automatically turned off (disabled). To turn the computer on: • Press and hold the Power button for approximately 3 seconds, and then release. To turn the computer off: 1.
Sleep Mode Sleep mode automatically turns the touch panel display off and locks the computer to save battery power when the computer is inactive for a programmed period of time. 1. Press and release the Power button to wake the computer. 2. Drag the computer. toward the top of the display to unlock the Adjust the Display Sleep Time To adjust the amount of time before the display sleeps after inactivity: 1. Touch > Settings > Display > Advanced > Sleep. 2.
About the Home Screen Notification / Status Bar Search Bar Touch to initiate a voice search or command. Home Screen Panel Touch to access all apps.
Navigation and Function Buttons For button locations, see Mobile Computer Features. Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Press right, left or front scan button to trigger the scanner. Scan/Aux Use the Key Remap feature in the Settings app to select a button function. For example, the button could be set to initiate the push-to-talk (PTT) feature.
About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a bar code to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Bar Code with the Scan Demo Note: For optimum performance, avoid reflections by scanning the bar code at a slight angle. 1. Touch 2.
Sync Data To move files between your CK65 and a computer: 1. Connect the CK65 to your computer using a USB charge/ communication accessory. 2. On the CK65, swipe down from the top of the screen to see the notifications panel. 3. Touch the Android System USB charging notification twice, to open the options menu. 4. Select either Transfer files or Transfer photos (PTP). 5. Open the file browser on your computer. 6. Browse to the CK65.
Restart the Mobile Computer You may need to restart the mobile computer to correct conditions where an application stops responding to the system or the computer seems to be locked up. 1. Press and hold the Power button until the options menu appears. 2. Select Restart. To restart the computer if the touch panel display is unresponsive: • Press and hold the Power button for approximately 8 seconds until the computer restarts. Note: To learn about advanced reset options, see the user guide.
Limited Warranty For warranty information, go to www.honeywellaidc.com and click Get Resources > Product Warranty. Patents For patent information, see www.hsmpats.com. Trademarks Google, Android, Google Play and other marks are trademarks of Google LLC. Disclaimer Honeywell International Inc.
