Owner's Manual

ManualsBrandsHoneywell ManualsOtherHoneywell Channelized Digital Class A and Class B Bi-Directional Amplifiers

CHANNELIZED DIGITAL CLASS A AND CLASS B BDA

BDA

Bi-Directional Amplifier System

GENERAL

Honeywell offers all of the following components required for the design and installation of

the Emergency Radio Communication Enhancement Systems (ERCES):

SIGNAL BOOSTERS/BI-DIRECTIONAL AMPLIFIERS (BDA)

Honeywell Channelized Digital Class A and Class B BDAs are high-gain, high-power

channel selective (Class A) or band-selective (Class B) signal boosters/bi- directional

amplifiers that can be designed and customized to meet all public safety frequency band

ranges in ERCES applications. It is intended to provide reliable two-way radio signal

coverage inside buildings, tunnels and other structures. The state-of-the-art DSP-based

filter design, combined with our industry leading, band-pass duplexer filters, deliver a

reliable performance in even the most challenging RF environments. The product delivers

high RF power with 5W rated amplifiers, while simultaneously, maintaining the industry

leading, power efficiency and reliability.

The innovative design delivers superior reliability and excellent performance in a small,

lightweight, and economical package. The inclusive design includes the following features:

The DSP programmable Class A, Class B BDAs and power supplies are designed to meet and

exceed the published UL 2524 2nd Edition standard requirements (UL 2524 2nd Edition

listing pending) for In-building 2-Way Emergency Radio Communication Enhancement

Systems, NFPA and IBC/IFC standards compliance.

FEATURES AND BENEFITS

• Support for public safety frequency

bands, various Channel and Band

Selective, DSP Programmable models

available for the following:

-Class A, UHF (406.1 - 512MHz):

HON-BDA400-D5-1A

-Class B, UHF (406.1 - 512MHz):

HON-BDA400-D5-1B

-Class A, 800MHz: HON-BDA800-D5-1A

-Class B, 800MHz: HON-BDA800-D5-1B

-Class A, 700MHz and 800MHz Dual Band:

HON-BDA7800-D5-2A

-Class B, 700MHz and 800MHz Dual Band:

HON-BDA7800-D5-2B

• Lower Total Cost of Ownership

-High Power 5W (37dBm) Amplifiers with

10W (40dBm) Combined Downlink Power

on 700/800 MHz Dual band models

-High Gain: (92dB Typ)

-32-Channel Capacity (64 Channels with

700/800 MHz Dual band model)

• Excellent RF Performance

-Channel Selective Class A Filters

(12.5 or 25KHz)

-Band Selective Class B (500KHz, 250KHz,

150KHz, 25KHz or 12.5KHz)

-Low Processing Delay (12usec.) Filter

Options

-High Selectivity Filter Options

-State-of-the-art DSP FPGA Digital Filter

Design with programmable frequencies,

selectivity and delay

• High Reliability

-Low Noise Figure

-Uplink Noise Squelch: Completely

eliminates uplink noise from the BDA by

shutting off the uplink amplifier, while it is

idle achieving no transmissions from

within the building and eliminating the risk

of interrupting the public safety radio

network

-Oscillation Suppression Function built-in

prevents amplifier feedback and

oscillations

-3-year warranty (excluding battery)

• NFPA, IFC Code Compliance

-Supervisory Interfaces, NFPA-Compliant:

Alarm relay outputs used for the fire alarm

panel connection to monitor the BDA

Includes a supervised, dedicated

annunciator panel

-Built-In Control Panel with Status

Indications and Trouble Logs

-High Efficiency Power Supply with a

Choice of 12- 48Hr Battery Backup

-NEMA-4 Rated Enclosures, Watertight

Design

• High Efficiency Power Supply with a

Choice of 12- 48Hr Battery Backup

-PSU unit includes Power Supply, Charger,

Battery Backup and Supervision

-High Efficiency (>90%)

-Fully Supervised

-Redundant AC Power Supplies

-Smart Battery Charger with Battery

Supervision

-Built-in Control Panel with LED Status

Indication

The Digital BDA offers superior channel selective (Class A) or

band-selective (Class B) amplification to be used in ERCES

applications.

• signal boosters/ Bi-Directional Amplifiers (BDA) • batteries and battery enclosures

• Distributed Antenna Systems (DAS) antennas • design services and training

• coaxial cable • donor antennas

• connectors and lightning arrestors • power dividers and hybrid couplers

• NFPA, IFC and UL® compliant supervisory interfaces

• AC power supply

• Battery Charger and Dedicated Annunciator Panel.

• Honeywell Channel and Band Selective, DSP Programmable Class A,

Class B BDAs and power supplies

firealarmresources.com

Summary of content (6 pages)

PAGE 1
CHANNELIZED DIGITAL CLASS A AND CLASS B BDA Bi-Directional Amplifier System The Digital BDA offers superior channel selective (Class A) or band-selective (Class B) amplification to be used in ERCES applications.
PAGE 2
ELECTRICAL SPECIFICATIONS Table 1 lists the electrical specifications for each Honeywell BDA models. Specification HON-BDA400-D5-1A HON-BDA400-D5-1B HON-BDA800-D5-1A HON-BDA800-D5-1B HON-BDA7800-D5-2A HON-BDA7800-D5-2B Frequency Range (MHz) DL: 406.1-512 UL: 402-512 FCC ID 2AHPSB400M3A UL1: 799-805 UL2: 806-817 DL1: 769-775 DL2: 851-862 DL: 406.
PAGE 3
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS Table 2 lists the mechanical and environmental specifications for each BDA model. Specification HON-BDA400-D5-1A HON-BDA400-D5-1B HON-BDA800-D5-1A HON-BDA800-D5-1B HON-BDA7800-D5-2A Enclosure Environmental Rating Dimensions (WxDxH) Weight (With Duplexers) Typ. (lbs) Enclosure Color NEMA-4 (Type-4) NEMA-4 (Type-4) NEMA-4 (Type-4) NEMA-4 (Type-4) NEMA-4 (Type-4) HON-BDA7800-D5-2B NEMA-4 (Type-4) 23.23”x8.32” x24” 23.23”x8.32” x24” 23.23”x8.32” x24” 23.
PAGE 4
Figure 1 illustrates the setup for a typical BDA System Riser. Donor Antenna Direction-S/SE Antenna mast to be bonded to building steel Lightening-Arrestor, Grounded Located outside before the cable building entry. Roof 2 110V Emergency circuits 8-conductor:18-24GA cable To be supplied and installed by the Electrical Contractor. BDA 4th Floor BDA status annunciator, mounts on a standard, 4-2-gang electrical box. Box supplied and installed by the EC.
PAGE 5
ORDERING INFORMATION (CONTINUED) Cable, Connectors, and Lightning Arrestors (Continued) BDA-EOL-10: Antenna Sensor / End of the line termination. BDA-JMPRG-10: Coaxial Cable Jumper NM-NM RG58, 18" long. BDA-JMPRG-11: Coaxial Cable Jumper NM-NM RG58, 37" long. BDA-LA-P8AX-6G: Coaxial surge protector, UL listed.
PAGE 6
CHANNELIZED DIGITAL CLASS A AND CLASS B BDA TECHNICAL Building with Insufficient Public Radio Coverage - Non-compliant to Code AGENCY LISTINGS AND APPROVALS These listings and approvals apply to the modules specified in this document. In some cases, certain modules or applications may not be listed by certain approval agencies, or listing may be in process. Consult factory for latest listing status.