User's Guide

10 - 15
Character Deactivation Mode *Off HSTDEN0 5-12
On HSTDEN1 5-13
Deactivation Character HSTDCH## 5-13
Reread Delay Short (500 ms) DLYRRD500 5-13
*Medium (750 ms) DLYRRD750 5-13
Long (1000 ms) DLYRRD1000 5-13
Extra Long (2000 ms) DLYRRD2000 5-13
User-Specified Reread Delay Range 0 - 30,000 ms DLYRRD##### 5-13
Output Sequence Editor Enter Sequence SEQBLK 5-16
Default Sequence SEQDFT 5-16
Sequence Timeout (Range 1 - 65535) *5000 ms SEQDLY##### 5-16
Sequence Match Beeper *On SEQBEP1 5-16
Off SEQBEP0 5-16
Partial Sequence Transmit Partial Sequence SEQTTS1 5-16
*Discard Partial Sequence SEQTTS0 5-17
Require Output Sequence Required SEQ_EN2 5-17
On/Not Required SEQ_EN1 5-17
*Off SEQ_EN0 5-17
No Read On SHWNRD1 5-17
*Off SHWNRD0 5-17
Prefix/Suffix Selections
Add CR Suffix to All Symbologies VSUFCR 6-2
Prefix Add Prefix PREBK2## 6-2
Clear One Prefix PRECL2 6-2
Clear All Prefixes PRECA2 6-2
Suffix Add Suffix SUFBK2## 6-2
Clear One Suffix SUFCL2 6-2
Clear All Suffixes SUFCA2 6-2
Transmit Alternate Extended ASCII
Characters
*Transmit Alternate Extended ASCIi KBDEXT0 6-3
Transmit Normal Extended ASCIi KBDEXT1 6-3
Function Code Transmit *Enable RMVFNC0 6-4
Disable RMVFNC1 6-4
Communication Check Character *None HSTXRC0 6-4
LRC Starts on 1st Character HSTXRC1 6-4
LRC Starts on 2nd Character HSTXRC2 6-4
CRC HSTXRC3 6-4
Intercharacter Delay Range 0 - 65535 (5ms increments) DLYCHR## 6-5
User Specified
Intercharacter Delay
Delay Length
0 - 65535 (5ms increments)
DLYCRX## 6-5
Character to Trigger Delay DLY_XX## 6-5
Interfunction Delay Range 0 - 65535 (5ms increments) DLYFNC## 6-6
Intermessage Delay Range 0 - 65535 (5ms increments) DLYMSG## 6-6
Selection
Setting
* Indicates default
Serial Command
# Indicates a numeric entry
Page