Install Instructions

Enclosure
IP54
Seals and gaskets
Hydrocarbon resistant NBR rubber type
Standards and Approvals
The C6097A pressure switch conforms with the following EC
directives:
• Gas Appliance Directive (90/396/EEC)
PIN: CE-0063AR1571
• Low Voltage Directive (73/23/EEC)
• Electro Magnetic Compatibility Directive (89/336/EEC)
INSTALLATION
1. Read these instructions carefully. Failure to follow
the instructions could damage the product
or
cause a hazardous condition.
2. Check the ratings given in the instructions and on
the product
to make sure the product is suitable
for
your application.
3. The installation has to be carried out by qualified
personel only.
4. Carry out a thorough checkout when installation is
completed.
5. Electrical installation must be in accordance with
local requirements.
Stand alone models
c
49,5
74
E
F
D
E=j68
61 69
G
B
K
H
J --tlF---,-------t--,--,,_
----- 69 -------I
52
1----=---.::-- 69-------1
1---- 52 ------1
E
B
K
Flanged mounted models
C
J --ttf---,-------t--,--,,_
H
A Bracket mounting hole (3), M4 tapping, depth 5 mm
B Cover screw
C
Dial indicator
D Conduit hole
22 mm (for plug connection PG11) or,
three pin (DIN) plug connection
E Inlet positive pressure
(Rp 1/4")
F Pressure test nipple
(0 9)
G Differential pressure (Rp 1/8")
~} w;" ooo"d;oo ",m;,,'
L Earth connection terminal
M Mounting screw holes
(2 x 4.5 mm) for flanged versions
Fig. 1. Installation drawing C6097A gas pressure switch
EN1R-91729907R1-NE
2