Submittal Sheet

ManualsBrandsHoneywell ManualsGas and Oil Burner AccessoriesCadmium-Sulfide Flame Detector w/ 15" leads

C554A CADMIUM SULFIDE FLAME DETECTOR

60-2148—4

Mounting

Direct Replacement for Standard Models

Mount the C554A at the rear of the burner. The mounting

bracket can be bent to fit, if necessary.

Direct Replacement for SUPER TRADELINE

and

TRADELINE

Models

쐃 Select the mounting bracket that most closely matches

the existing mounting bracket (SUPER TRADELINE®)

or use the bracket provided (TRADELINE®).

쐇 Remove the cell from the socket.

쐋 Insert the mounting bracket into the socket slot (Fig. 3)

as far as it will go.

NOTE: Bend the mounting bracket to fit, if necessary.

쐏 While holding the mounting bracket in the slot, insert the

screwdriver in the other end of the slot (Fig. 3). Bend the

screwdriver, first to the left and then to the right, to crimp

the end of the mounting bracket and hold it in position.

쐄 Remove the screwdriver and replace the cell.

쐂 Mount the new cell and bracket assembly in the

location of the old assembly.

Oil Line Mounting for SUPER TRADELINE

and

TRADELINE

Models

If desired, mount the C554A on the oil line using the oil line

adapter bracket and the mounting bracket that give the

C554A the best view of the flame (SUPER TRADELINE®) or

use the mounting bracket provided (TRADELINE®).

BRACKET

SLOT

SOCKET

LEADWIRE

M7853

Fig. 3. Insert mounting bracket into socket slot.

쐃 Remove the cell from the socket.

쐇 Insert the mounting bracket into the slot on the socket

(Fig. 4) as far as it will go.

NOTE: Bend the mounting bracket to fit, if necessary.

BRACKET

SOCKET

LEADWIRE

SCREWDRIVER

SLOT

INSERT SCREWDRIVER AND MOVE IN DIRECTION SHOWN BY

ARROWS TO SECURE BRACKET IN SOCKET

M7855

Fig. 4. Insert screwdriver to secure bracket in socket.