Honeywell International Inc. 23500 W 105th Street Olathe, KS 66061 U.S.A CAGE: 22373 Telephone: (800) 601-3099 (U.S.A./ Canada) Telephone: (602) 365-3099 (International) AV8OR User’s Guide Pub. No.D200803000008 Page -i Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User Guide Honeywell-Confidential Honeywell-Confidential THIS COPYRIGHTED WORK AND ALL INFORMATION ARE THE PROPERTY OF HONEYWELL INTERNATIONAL INC., CONTAIN TRADE SECRETS AND MAY NOT, IN WHOLE OR IN PART, BE USED, DUPLICATED, OR DISCLOSED FOR ANY PURPOSE WITHOUT PRIOR WRITTEN PERMISSION OF HONEYWELL INTERNATIONAL INC. ALL RIGHTS RESERVED. Honeywell Materials License Agreement The documents and information contained herein ("the Materials") are the proprietary data of Honeywell International Inc.
AV8OR User Guide Honeywell-Confidential operate, maintain, or repair Honeywell aerospace products only in accordance with that agreement.
AV8OR User Guide Honeywell-Confidential agreement, or your formal designation as a third party service provider. Upon termination of this License Agreement, you will return these Materials to Honeywell without retaining any copies and will have one of your authorized officers certify that all Materials have been returned with no copies retained. 7. Remedies - Honeywell reserves the right to pursue all available remedies and damages resulting from a breach of this License Agreement. 8.
AV8OR User Guide Honeywell-Confidential Copyright - Notice Copyright 2008, Honeywell International Inc. All rights reserved. Honeywell is a registered trademark of Honeywell International Inc. All other marks are owned by their respective companies. Pub. No.D200803000008 Page -v Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide Table of Contents Table of Contents 1. INTRODUCTION .................................................................... 1-1 Honeywell Customer Support ..................................................... 1-2 Honeywell Aerospace Technical Publications ............................ 1-3 2. Getting Started...................................................................... 2-1 Unit overview ..............................................................................
AV8OR User’s Guide Table of Contents Present Position Data Field ......................................... 3-17 Stop Watch Data Field ................................................. 3-18 Time Data Field............................................................ 3-18 Track Angle Error Data Field ....................................... 3-20 Track Angle Data Field ................................................ 3-20 Track To Steer Data Field ............................................
AV8OR User’s Guide Table of Contents Messages Function ................................................................... 3-67 Notepad ................................................................................ 3-69 System Setup Function............................................................. 3-72 System Setup Menu ............................................................. 3-72 General System Setup................................................. 3-73 Map Setup...............................
AV8OR User’s Guide Table of Contents POI (POINTS OF INTEREST) ..................................... 4-29 Saving POI ................................................................... 4-30 Managing POI .............................................................. 4-30 ROAD SAFETY CAMERAS......................................... 4-30 Saving Road Safety Cameras ..................................... 4-31 Camera Warning .......................................................... 4-31 Camera Types ............
AV8OR User’s Guide Table of Contents Changing the color of a Track Log .............................. 4-59 Saving a Route ..................................................................... 4-59 Loading a Saved Route ........................................................ 4-60 Reference book (Advanced mode) ........................................... 4-61 Map Screen .......................................................................... 4-62 Icons on the map .........................................
AV8OR User’s Guide Table of Contents Music Player ............................................................................... 5-1 Photos ......................................................................................... 5-2 Movie player................................................................................ 5-4 Ebook Reader ............................................................................. 5-5 Downloading Multimedia Files ....................................................
AV8OR User’s Guide Table of Contents List of Illustrations Figure 2-1: AV8OR Controls ........................................................... 2-1 Figure 2-2: Charging with AV8OR turned off .................................. 2-5 Figure 2-3: Charge is completed ..................................................... 2-6 Figure 2-4: AV8OR Power Up ......................................................... 2-7 Figure 2-5: AV8OR Power off .........................................................
AV8OR User’s Guide Table of Contents Figure 3-27: Map – Airport information ......................................... 3-27 Figure 3-28: Map - Airport Filter .................................................... 3-27 Figure 3-29: Map – Direct-To OFF ................................................ 3-28 Figure 3-30: Map - Select a NAVAID ............................................ 3-29 Figure 3-31: Map - Direct To a NAVAID .......................................
AV8OR User’s Guide Table of Contents Figure 3-68: Flight Plan - Save Waypoint ..................................... 3-52 Figure 3-69: Flight Plan – Flight Plan Accepted ........................... 3-52 Figure 3-70: Flight Plan Index Page ............................................. 3-53 Figure 3-71: Flight Plan - DATA VIEW.......................................... 3-54 Figure 3-72: Flight Plan Selected WPT from Map ........................ 3-54 Figure 3-73: Flight Plan - FPLAN ADMIN .....................
AV8OR User’s Guide Table of Contents Figure 3-109: System Setup – Demo Mode Setup Ident Details .. 3-87 Figure 3-110: Device Setup Menu ................................................ 3-88 Figure 3-111: System Setup – Status Page.................................. 3-89 Figure 3-112: System Setup – Internal GPS Status ..................... 3-89 Figure 3-113: System Setup – External GPS Status .................... 3-90 Figure 3-114: System Setup – Software and Database Version ..
AV8OR User’s Guide Table of Contents Figure 7-2: Weather Setup - KDR-610............................................ 7-7 Figure 7-3: WxWorx XM Weather Setup......................................... 7-9 Figure 7-4: WxWorx Bluetooth Receiver Setup ............................ 7-10 Figure 7-5: BlueTooth Main Page ................................................. 7-11 Figure 7-6: BlueTooth Manager .................................................... 7-11 Figure 7-7: BlueTooth - Search in Process .............
AV8OR User’s Guide 1. Introduction INTRODUCTION Thank you for choosing the Honeywell AV8OR, a Multi-Function Display (MFD) that integrates GPS, Navigation Database, Graphical Terrain, XM Weather into a single, easy to use, portable aviation device. In addition to the benefits for aviation use, this device also contains a complete compliment of automotive navigation and multimedia features for use when not in your aircraft.
AV8OR User’s Guide Introduction HONEYWELL CUSTOMER SUPPORT For more information, including details regarding your warranty, visit www.bendixking.com/av8or. For technical support of this product please contact your local Bendix/King Dealer. To locate the Bendix/King Dealer nearest you visit www.bendixking.com/av8or. For additional support, contact Honeywell Customer & Product Support: at: US & Canada: 1-877-712-2386 All other countries: 1-913-712-2613 Fax: 1-913-712-5697 Pub.
AV8OR User’s Guide Introduction HONEYWELL AEROSPACE TECHNICAL PUBLICATIONS If you have access to the Internet, go to the Honeywell Online Technical Publications Web site at https://portal.honeywell.com/wps/portal/aero to: • Download or see publications online • Make an order for a publication • Tell Honeywell of a possible data error in a publication.
AV8OR User’s Guide 2. Getting Started GETTING STARTED UNIT OVERVIEW Figure 2-1: AV8OR Controls Displays and Controls The AV8OR has the displays and controls that follow as shown in Figure 2-1: Pub. No D200803000008 Page 2-1 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide FIG NO Getting Started 1 DISPLAY OR CONTROL Touch screen 2 POWER key 3 MENU key 4 LED charging status indicator 5 SD slot and SD card The SD slot holds a SD card which contains the aviation and automotive navigation software. 6 LOCK tab 7 6 VDC power connector 8 Microphone The LOCK tab disables all controls and stops the touch screen from responding to taps. This connector lets the unit receive power from an AC or an automotive DC.
AV8OR User’s Guide FIG NO Getting Started DISPLAY OR CONTROL DESCRIPTION cable. 10 11 AV-IN port Headset jack Future expansion The headset jack accepts a standard headphone miniature stereo adapter so the user can listen to music or movies from the unit. 12 Volume control knob The volume control controls the volume of the sound through the rear speaker or the Headset jack if a headset is plugged in.
AV8OR User’s Guide Getting Started INCLUDED DATABASE AV8OR SYSTEM PART NUMBER DATABASE ( ON SD CARD) HONEYWELL PART NUMBER 066-01207-0001 USA Maps 071-00261-0101 066-01207-0002 European Maps 071-00261-0102 The AV8OR comes with the standard equipment that follows: ITEM 1 PART NUMBER 066-01207-0099 2 3 005-03702-0002 005-03702-0003 4 5 6 7 8 9 10 11 005-03702-0004 005-03702-0005 005-03702-0006 005-03702-0007 005-03702-0009 005-03702-0010 005-03702-0012 005-03702-0013 DESCRIPTION GPS Base Disp
AV8OR User’s Guide Getting Started Note: The list of optional equipment may change in the future. For the latest list of options please visit the www.bendixking.com/av8or website. CHARGING THE INTERNAL BATTERY Before using this unit for the first time, the internal battery in the AV8OR must be charged. Find the power connector (7) on the right side of the unit. Refer to Figure 2-1. Recharge the unit by either using the DC power adapter or the 120/220V AC adapter.
AV8OR User’s Guide Getting Started Figure 2-3: Charge is completed USING AV8OR This section explains how to enter and select information with the AV8OR. Understanding Terms The AV8OR unit is designed to allow quick, convenient selection of navigation options and data entry. As you progress through this user’s manual, you are directed to tap a specific soft key or highlight a field on the screen. In order to highlight a field, just touch the field on the screen.
AV8OR User’s Guide Getting Started • Scroll Bar: When viewing a list of items that is too long to show on the screen, a scroll bar appears along the right side of the list. To scroll through a list, hold your finger or stylus on the scroll bar and move your finger or stylus up or down and the list of items will move up or down too. TURNING AV8OR ON/OFF The first time your new AV8OR is turned on, the GPS receiver must collect satellite data and establish its present location.
AV8OR User’s Guide Getting Started Figure 2-5: AV8OR Power off AV8OR SLEEP MODE AV8OR can be put into sleep mode as shown in Figure 2-6. AV8OR, while in sleep mode, continues to run in a low power mode. Figure 2-6: AV8OR Sleep Mode Turn Sleep Mode On and Off 1. To put the unit in Sleep mode, press and quickly release the Power soft Key until Sleeping shows on the screen for a moment, then the screen goes blank. 2. To wake up the unit, press and quickly release the Power soft Key.
AV8OR User’s Guide Getting Started Figure 2-7: Main Menu GETTING SATELLITE SIGNALS When the AV8OR is turned on, it automatically begins to search for satellite signals. This process can take a few minutes. Be sure the device has a clear and unobstructed view of the sky. View GPS status from Settings You can monitor GPS status by tapping the Settings soft key on the Main Menu page (refer to Figure 2-7), and tapping on the GPS Status soft key (refer to Figure 2-8).
AV8OR User’s Guide Getting Started GPS Signal Strength The GPS Signal Strength page is the default page for GPS Status. As the receiver locks onto satellites, a bar appears for each satellite. The bar shows the signal strength for each satellite. The bar changes color from grey to blue when the satellite is locked.
AV8OR User’s Guide Getting Started Figure 2-10: GPS Information of Current position GPS Data Flow Tapping this soft key shows the GPS NMEA data in real-time. Figure 2-11: GPS Data flow Satellite Acquisition Reset Tapping this soft key causes the GPS engine to reset. If the unit has difficulty acquiring satellites, tapping the GPS reset soft key will clear the GPS engine memory. Figure 2-12: GPS Reset Tap the soft key to return to the Settings page. Pub.
AV8OR User’s Guide Basic Operation 3. Aviation Mode Operation AVIATION MODE OPERATION BASIC OPERATION This section introduces how to start the aviation mode navigation, and what the status of the program is during the initialization process. Aviation Mode On the Main Menu page, tap the Aviation mode navigation program. icon to start the Program Startup While the Aviation mode is starting, a startup title page is displayed, as shown in Figure 3-1.
AV8OR User’s Guide Basic Operation Aviation Mode Operation If the initial self-test fails, the unit is unable to continue operating is displayed in place of the check mark and the first safely. A red soft key changes to HELP, as shown in Figure 3-2. Figure 3-2: Self Test Failed When the HELP soft key is tapped, a caution message is displayed as in Figure 3-3. Figure 3-3: Self Test Failed Caution The unit should be turned off and then turned back on.
AV8OR User’s Guide Basic Operation Aviation Mode Operation Figure 3-4: SELF TEST COMPLETED Page The SELF TEST COMPLETED page shows for 2 seconds then the final title page is displayed as shown in Figure 3-5. Figure 3-5: Final Title Page The final title page shows the expiration date of the current database. Use the AV8OR as an aid to situational awareness only when the database is current.
AV8OR User’s Guide Basic Operation Aviation Mode Operation The user can browse the Bendix/King web page at http://www.bendixking.com/av8or to see if a newer version of the software or database is available. If the OK soft key is pushed to acknowledge the Jeppesen database, the Aviation Map page is displayed, as shown in Figure 3-7. If the DEMO MODE soft key is tapped, then AV8OR will enter a simulation mode.
AV8OR User’s Guide Basic Operation Aviation Mode Operation Figure 3-7: Map Page Aviation Main Menu Page Tap on the MAIN MENU soft key on the Map page to display the Aviation Main Menu Page. Figure 3-8: Main Menu Page An example of each function in Aviation Mode appears below. Each function has a specific use and is discussed later in this guide. The following figures are each of the function’s first pages. • Map: Tap on the soft key on the Aviation Main Menu to return to the Moving Map page.
AV8OR User’s Guide Basic Operation • Aviation Mode Operation Flight Plans: Tap on the soft key on the Aviation Main Menu to show the Flight Plan Index page. The Flight Plan Index page allows user Waypoints (WPT) and flight plans be edited and/or created. Refer to the Flight Plan Function section for a detailed explanation of the use of flight plans. Figure 3-9: Flight Plan – Flight Plan Index Page • Messages: Tap on the soft key on the Aviation Main Menu to show the Messages page.
AV8OR User’s Guide Basic Operation Aviation Mode Operation Figure 3-10: Messages – Messages Info Page • Weather: Tap on the soft key on the Aviation Main Menu to show the Weather page. The AV8OR system connects with a Bendix/King KDR-610 XM receiver or a WxWorx XM receiver through a Bluetooth or RS 232 interface to receive weather data from the XM Satellite Radio network. Refer to the Weather Function section for a detailed explanation of the Weather function.
AV8OR User’s Guide Basic Operation • Aviation Mode Operation Settings: Tap on the soft key on the Aviation Main Menu to show the Settings page. Use the System Setup Menu to setup map, navigation, data fields, flight plan and other display preferences. Refer to the System Setup Function section for a detailed explanation of the system setup function. Figure 3-12: System Setup – System Setup Menu page • Exit: Tap on the soft key on the Aviation Main Menu to exit back to the Main Menu. Pub.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation VFR MOVING MAP FUNCTION The AV8OR features a real-time moving map that can do much more than just plot your course. The core capability of AV8OR MAP mode function is its intuitive mapping and navigation function, which is capable of displaying highly detailed, vectored (point and line) maps.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation • North Pointer (3): In the upper left corner of the Map display is a North pointer. The pointer has a triangle shape . The north pointer always points north to help orient the map view. Double tapping on the north pointer toggles the map orientation between North Up and the Track Up mode. • Map Page (4): The map page is the main page for Go Fly aviation mode. The map page shows the aircraft position on the map.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation of the data window column . The status window also shows the battery condition and the status of the XM weather receiver . • Caution: When AV8OR has lost its GPS position fix, a blue “No position data” caution message is displayed across the screen and the aircraft symbol is not displayed.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation • Map page Pointer/Non-Pointer: The Non-pointer MAP mode screen is displayed showing the aircraft’s current position on the map using the aircraft symbol in the center of the screen, if valid GPS signals are available. Figure 3-16: Map – Non-pointer Map mode If the soft keys have been hidden, touching anywhere on the screen in the Main Map Window, will activate a black arrow pointer and the CLEAR PTR and PTR MENU soft keys will be shown.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation In Pointer Map mode, the pointer tag window displays the pointer position in the currently selected coordinate system. Below the pointer tag window, the title window component displays the bearing and distance of the pointer relative to the aircraft’s position. Figure 3-18: Map – Pointer Tag Window / Title Window The pointer is removed from the screen after 30 seconds of no further input (touching and dragging of the pointer).
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Data Fields Up to four data windows can show at a time on the left side of the map page. Up to 9 data windows can be configured for display. The five data windows that do not show on the page are displayed by dragging the data windows up or down to show the data fields that are off screen. Data fields are selected in the System Setup Menu, Refer to the System Setup Function section.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Departure Time Data Field The departure time window displays the departure time when the ground speed of the aircraft is 20 knots or higher. The time is displayed in HH:MM format. The time is dashed if there is no departure time available. Distance to Waypoint Data Field The distance to waypoint data window displays the distance from the aircraft to the destination waypoint.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Estimated Time En-Route Data Field The estimated time en-route data window displays the calculated time en route as the distance to the destination waypoint, divided by the ground speed. If the ETE is greater then 10 minutes then the format is HH:MM. If HH is less than 10 then no leading zeroes are displayed. Otherwise the format is MM:SS, with leading zeroes displayed.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Minimum Safe Altitude Data Field The minimum safe altitude data window displays the minimum off-route altitude (from the Jeppesen MORA database.) at the current aircraft position. The MSA value is displayed in the currently selected units for altitude. If the position is invalid then the MSA value is displayed as dashes.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Stop Watch Data Field The Stop Watch Window displays the current value of the Stop Watch in MM:SS format. The time counts up from 00:00 when enabled (started) and the text color changes to yellow. The time stops counting when disabled and the text color changes to white. The time is displayed as --:-- in white text when the window is first displayed. The largest value that can show is 99:59 at which time it rolls over to 00:00.
AV8OR User’s Guide VFR Moving Map Function Time Zone Abbreviation CST CDT MST MDT PST PDT AKS AKD HAS HAD SST SDT Aviation Mode Operation Description Offset from UTC Time Central Standard Time Central Daylight Saving Time Mountain Standard Time Mountain Daylight Saving Time Pacific Standard Time Pacific Daylight Saving Time Alaska Standard Time Alaska Daylight Saving Time Hawaii Standard Time Hawaii Daylight Saving Time Samoa Standard Time Samoa Daylight Saving Time - Pub.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Track Angle Error Data Field The track angle error data window displays the difference between the desired track and the current aircraft track over ground in integer degrees. An arrow indicates the direction to steer to reduce the track angle error. Track Angle Data Field The track angle data window displays the track angle of the aircraft over the ground in integer degrees relative to magnetic north.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation distance between the aircraft position and the desired track. An arrow is displayed to the right of the cross track error value indicating the direction to steer to reduce the cross track error. VFR Moving Map Operation MAP ZOOMING ZOOM IN or ZOOM OUT changes the current map range to the next value.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation SmartProfile SmartProfile displays the vertical profile of the flight path along the route of flight above the title bar. A cross section of the terrain for the flight is shown on the vertical profile. A dashed line is shown to represent the altitude of the flight path. If SmartProfile is OFF, touching the soft key toggles SmartProfile to ON. The map image shrinks 25%.
AV8OR User’s Guide VFR Moving Map Function • Aviation Mode Operation Topo On Figure 3-22: Map – Topo On • Relative Terrain CAUTION NEVER USE THE TOPOGRAPHIC ELEVATION DISPLAYED ON THIS EQUIPMENT AS YOUR SOLE REFERENCE FOR TERRAIN AVOIDANCE. Figure 3-23: Map – Relative Terrain o On the Relative Terrain map, the terrain is colored according to its height relative to the aircraft, as shown in the following table. Pub. No D200803000008 Page 3-23 Revision July 2008. © Honeywell International Inc.
AV8OR User’s Guide VFR Moving Map Function o o o o o o Aviation Mode Operation A 0.5 Nm radius circle around each is colored according to the height of the obstacle relative to the aircraft, as shown in the following table.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Topo Off Figure 3-24: Map – Topo Off Tapping the MAP SETUP soft key allows the user to configure the Map Setup options. For more detail information about Map Setup, refer to the System Setup – Map Setup section. NEAREST – Select Nearest Destination: The NEAREST soft key gives access to the Nearest Database Selection window, as shown in Figure 3-25.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Tapping the NEAREST soft key on the Map page shows the Nearest Database Selection menu. In the menu you can select; Nearest Airports, Nearest VORs, Nearest User WPTs or Nearest Towns and Cities as a destination. The 40 nearest Airports/Helipads, VORs or User Waypoints or a combination of them that are nearest to the aircraft’s current position are accessible through the Nearest Database Selection menu.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Figure 3-27: Map – Airport information For Nearest Airports, tapping the AIRPORT FILTER soft key allows the user to configure the airport filter by setting the minimum runway length and surface requirements. The filter will not allow airports below the minimum requirements to be displayed in the list.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Figure 3-29: Map – Direct-To OFF DIRECT-TO NAVIGATION Direct-To Navigation lets the user set a course line from his current position to any other position. Direct-To Navigation can be done with the methods that follow: • Create a Direct-To course from the Map. • Create a Direct-To course from the keyboard entry.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Figure 3-30: Map - Select a NAVAID Tapping the PTR MENU soft key, on the right side of the screen, shows the soft key. Figure 3-31: Map - Direct To a NAVAID (direct) soft key causes the system to create a new Tapping the course from the aircraft’s present position directly to the selected NAVAID point. The new course line is colored magenta. Pub. No D200803000008 Page 3-29 Revision July 2008. © Honeywell International Inc.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Figure 3-32: Map - Navigate to a NAVAID point Create a Direct-To course from the keyboard entry (No Flight Plan) soft key from the Map page to display the virtual Tap the keyboard on the screen as shown in Figure 3-33. Figure 3-33: Map – Virtual Keyboard Tap the Esc soft key to return to the Map page. Tap the Clear soft key to clear the entry you typed in.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation After the Enter key is tapped, a Waypoint Entry screen shows detailed information about the entered location. Figure 3-34: Map – Entered Waypoint Info Tap the CANCEL soft key to cancel the Direct-To and return to the virtual keyboard page to enter a different location or to Esc back to the Map page. Tap the MORE INFO soft key to see additional information about the location. If additional pages are available, the NEXT INFO soft key shows.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation create a new course line to the destination from the aircraft’s present position by using the steps that follow: soft key from the Map page to display the virtual Tap the keyboard. The active Direct-To destination will already be filled in on the keyboard. Figure 3-35: Re-center aircraft – Step 1 Tap the Enter soft key to use the entered WPT and re-center the course line from the aircraft’s present position to the destination.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Figure 3-36: Step 1 Bypass a WPT Tap on the soft key to display the Active Flight Plan page. Figure 3-37: Bypass a WPT - Step 2 Highlight the WPT in the Active Flight Plan you want to go to next. Figure 3-38: Bypass a WPT - Step 3 Pub. No D200803000008 Page 3-33 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Tap on the soft key to create a new course from the aircraft’s present position to the selected WPT. Figure 3-39: Bypass a Waypoint Step 4 Enter a Direct-To WPT with a flight plan active. The active course shows as a magenta line on the Map. Figure 3-40: Enter a New WPT with Flight Plan Active Pub. No D200803000008 Page 3-34 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide VFR Moving Map Function Tap on the Aviation Mode Operation soft key to display the Active Flight Plan page. Figure 3-41: Enter New WPT – Select KEYBD Soft key Tap on the KEYBD ENTRY soft key to display the virtual keyboard entry screen with the next WPT entry already entered. Enter the new WPT you want to go direct to. Figure 3-42: Enter New WPT Ident Tap on the Enter soft key when done and then tap on the OK soft key to activate the Direct-To WPT.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Figure 3-43: New Direct-To Active. PTR MENU When you tap a NAVAID point or any blank place on the map, the PTR MENU soft key is displayed. Tap the PTR MENU soft key to show the pointer menu. Using the menu you can save this Waypoint or Center the map around the selected point. . Figure 3-44: Map – NAVAID Point PTR MENU Pub. No D200803000008 Page 3-36 Revision July 2008. © Honeywell International Inc.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Figure 3-45: Map – User Defined Point PTR MENU Choose the Center Map item and tap the SELECT soft key to display the pointer position at the center of the map. Choose the Save Waypoint item, and tap the SELECT soft key, a user defined WPT is created at the point position on the map with the name USRXXX, as shown in Figure 3-46.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation and distance (PDIS) are shown on two lines at the bottom left of the screen To select a user defined point on the map: If the user taps on a point on the map that is not a NAVAID pointer stored in database, taps on the PTR MENU soft key and then taps soft key, a temporary WPT named USRXXX is created at the the pointer position on the map and a new course from the aircrafts present position directly to the selected NAVAID point is created.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Figure 3-48: OBS Course to NAVAID To select a user defined point on the map: If the point the user touches is not a NAVAID point, then after the OBS soft key is tapped, a temporary WPT is created at that position. The OBS course ends at that user defined temporary WPT. To edit the OBS Course Angle, double tap on the OBS Course Window to open a key pad.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Figure 3-50: Map – OBS Navigation Tap the OBS ADJUST soft key to show the following window. Figure 3-51: Map – OBS Configuration Here double tapping on the OBS Course window allows the user to adjust the OBS course. Cancel the OBS using the or CANCEL OBS soft keys.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation The CENTER MAP option is tapped to center the map on the PTR position on the map. Tap on the CLEAR PTR to return clear the PTR position and center the aircraft on the map. The PTR position will remain centered on the Map for a period of time and then the Map page changes to show the aircraft position centered on the Map.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation Figure 3-53: Map – Center Aircraft Selectable GPS Data Source The AV8OR system can receive data from either the internal or an external GPS Source. When an external source is configured, the unit uses data from it. Switching to the internal GPS source is automatic when data from the external source is no longer valid or available.
AV8OR User’s Guide VFR Moving Map Function • • • • • Aviation Mode Operation The following warning message is displayed that requires pilot confirmation. “The external GPS source is no longer available. The GPS source has been changed to the internal GPS backup. GPS limited to VFR use only. PRESS OK TO ACKNOWLEDGE”. Touching the OK soft key closes the message window.
AV8OR User’s Guide VFR Moving Map Function Aviation Mode Operation When the stopwatch is running, double tap the icon to stop the timer. Double tap the icon to reset it. When the stopwatch is active, it continues to count even if the stopwatch data window is not being displayed. Pub. No D200803000008 Page 3-44 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation FLIGHT PLAN FUNCTION VFR flight plans can be created in the AV8OR-XP when configured to use the internal GPS. Flight plans can also be created on a PC with the Jeppesen FliteStar© PC application. Refer to the Chapter 7 Appendix section, for more information on how to import a flight plan. The FLIGHT PLAN function is selected through the Aviation Main Menu, as shown in Figure 3-7. Tap on the Flight Plans page.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation Figure 3-56: New Flight Plan Page Tap on the INSERT soft key to display the virtual keyboard to page to enter WPTs. Figure 3-57: Virtual Keyboard Enter the Ident, name, WPT or location of the first location on the flight plan. Pub. No D200803000008 Page 3-46 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation Figure 3-58: Enter Waypoint Identifier Tap on Esc soft key to cancel the entry. Tap on the Clear soft key to clear the entry and start over. Tap the Enter soft key when complete to show the Waypoint Entry window. Figure 3-59: Waypoint Entry Window Pub. No D200803000008 Page 3-47 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation Tap the MORE INFO soft key to view additional data about the WPT. The NEXT soft key will show if additional pages are available. When finished, tap the CLEAR soft key to return to the Waypoint Entry page. If the WPT is not correct, tap on the CANCEL soft key to return to the virtual keyboard page. If the correct WPT is shown, tap on the OK soft key to save the first WPT on the flight plan.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation Creating New Flight Plan using MAP Selections soft key on the Aviation Main Menu Page to 1. Tap the show the Flight Plan Index page. Figure 3-62: Flight Plan Index 2. The NEW FLIGHT PLAN line is highlighted. Tap on the NEW FPLAN soft key to show the New Flight Plan page, as shown in Figure 3-63. Figure 3-63: New Flight Plan Page 3. Tap on the MAP VIEW soft key to show a map to select WPTs from.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation Figure 3-64: Flight Plan – Map Selction of WPTs 4. Use your finger or stylus to pan the map to the first WPT you want to enter into the flight plan. Use the Zoom In and Zoom out icons to make it easier to pan the screen. 5. Tap on the WPT to show the name and identifier. Figure 3-65: Flight Plan - Waypoint Detail To view detailed information about this point, tap the MORE INFO soft key on the right of the page.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation Figure 3-66: Flight Plan - Selected Waypoint Detail Information Tap the CLEAR soft key to close the WPT detailed information window. 6. After you select a WPT, tap the INSERT WPT soft key to insert that WPT into the new Flight Plan. The first WPT is displayed in the Flight Plan, as shown in Figure 3-67. Figure 3-67: Flight Plan - Stored Flight Plan with a Waypoint 7.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation Figure 3-68: Flight Plan - Save Waypoint 8. Tap the SAVE&EXIT soft key to save the selected WPTs, exit from the Stored Flight Plan page and return to the Flight Plan Index page. The name of the flight plan is displayed in the Flight Plan Index page, as shown in Figure 3-68 Figure 3-69: Flight Plan – Flight Plan Accepted 9. If you want to create another new Flight Plan, repeat steps 2 through 8.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation Figure 3-70: Flight Plan Index Page EDIT FPLAN Tap the EDIT FPLAN soft key to enter the stored flight plan page in data view mode. Here the user can edit the flight plan using map view mode or data view mode. On the bottom right side of the page is the MAP VIEW switch soft key. To change the title of the Flight Plan, tap on the flight plan NAME field. The keyboard window will open with the current name preloaded in the name field.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation Figure 3-71: Flight Plan - DATA VIEW Tap the MAP VIEW soft key to switch to map view mode. MAP VIEW mode In map view mode the user can select a WPT on the map, draw and move the map, tap on the map to insert a WPT. If the tap point is a current WPT in the flight plan the DELETE WPT soft key is shown to allow the user to delete it from the flight plan.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation FPLAN ADMIN Tap the FPLAN ADMIN soft key and the corresponding function soft keys on the right side of the Flight Plan Index page are shown. Figure 3-73: Flight Plan - FPLAN ADMIN COPY FPLAN Highlight the flight plan you want to copy and then tap the COPY FPLAN soft key. This function permits the selected flight plan to be copied for editing while not changing the original one.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation INVERT FPLAN This function reverses the selected flight plan’s WPT sequence. This lets the pilot return from a destination to the same starting point without creating a new flight plan. Highlight the flight plan that you wish to invert. Figure 3-75: Invert Flight Plan - Step 1 Tap on the INVERT FPLAN soft key to show the flight plan with the WPTs inverted from the stored flight plan.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation Figure 3-77: Invert Flight Plan - Step 3 DELETE FPLAN This function deletes the selected flight plan Highlight the flight plan on the Flight Plan Index Page you want to delete and tap on the DELETE FPLAN soft key. Figure 3-78: Delete Flight Plan USER WPTS Tapping the USER WPTS soft key shows the current User defined WPTs list. Refer to Figure 3-79. Pub. No D200803000008 Page 3-57 Revision July 2008. © Honeywell International Inc.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation Figure 3-79: Flight Plan - User Waypoint List The user can tap the NEW WPT soft key to define a new WPT. A maximum of 1000 user WPTs can be created. The user can also tap the EDIT WPT soft key to edit the selected WPT’s parameters. Figure 3-80: Flight Plan – New/Edit User Waypoint When the user creates a new WPT or edits an existing WPT, the User Waypoint Edit page is shown.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation Comment 1 / Comment 2 items and the CLEAR TEXT soft key becomes available to clear the comment text. Tap the RNG&BRG soft key to display the range and bearing configuration page. Figure 3-81: Flight Plan – WPT Range and Bearing Config In the Range and Bearing page the DELETE soft key allows the user to delete this WPT.
AV8OR User’s Guide Flight Plan Function Aviation Mode Operation Figure 3-82: Flight Plan - FLY FPLAN 3. Push the OK soft key to use the selected flight plan. When desired, the selected flight plan is navigated in reverse by tapping the INVERT FPLAN soft key. 4. The Active Flight Plan page lists the current active Flight Plan’s WPTs, as shown in Figure 3-83. The WPT in magenta with the arrow pointing to it is the current WPT. Figure 3-83: Flight Plan – Active Flight Plan 5.
AV8OR User’s Guide Weather Function Aviation Mode Operation WEATHER FUNCTION Tap the soft key on the Aviation Main Menu page to enter the weather page. Hardware Accessory The AV8OR unit will work with either the WxWorx REWX91D XM receiver or the certified KDR 610 XM receiver. See Device Setup Section of this document. The XM Weather receiver is used to receive the weather information which in then displayed on the screen.
AV8OR User’s Guide Weather Function Aviation Mode Operation Figure 3-84: WX – No Data Received Choose Product Once data has been received from the XM Receiver, the CHOOSE PRODUCT soft key is available to select the desired weather information products. Figure 3-85: WX – Non-pointer mode Select from the products shown in white. Highlight an available product and tap the SELECT soft key to complete the product selection. Pub. No D200803000008 Page 3-62 Revision July 2008.
AV8OR User’s Guide Weather Function Aviation Mode Operation Figure 3-86: WX – Choose Product The AV8OR can now show the following Weather Products: • NEXRAD Composite Reflectivity Figure 3-87: WX – NEXRAD Pub. No D200803000008 Page 3-63 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide Weather Function Aviation Mode Operation • Graphical METARs Figure 3-88: Graphical METARs • Graphical AIRMETs Figure 3-89: WX - AIRMETs Pub. No D200803000008 Page 3-64 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide Weather Function Aviation Mode Operation • Graphical SIGMETs • Graphical Conv-SIGMETs Legend In pointer mode (the user taps on the map and a black arrow pointer is shown) the LEGEND soft key is used to display the Legend Window. Pub. No D200803000008 Page 3-65 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide Weather Function Aviation Mode Operation Figure 3-90: WX – Pointer mode Figure 3-91: WX – Legend Info Pub. No D200803000008 Page 3-66 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide Messages Function Aviation Mode Operation MESSAGES FUNCTION Tap on the Messages soft key enter the Messages page. from the Main Menu page to Figure 3-92: Messages The User can also access the Messages page when a new message is indicated in the Status Window. Tap the flashing new message Status Window in any other function page and the Messages page is shown. The Message soft key stays active until the message has been viewed or the message has been removed from the queue.
AV8OR User’s Guide Messages Function Message Text Internal GPS failure Nav data Referenced to True North Nav data Referenced to User-Defined Mag Var Unit Configuration validation errors found, values set to default. User setting validation errors found, values set to default.
AV8OR User’s Guide Messages Function Message Text WPT from file Failed to merge user WPT from file Not enough available space to merge user WPTs Failed to merge FPL WPT Not enough space to merge flight plans Duplicate user WPT in flight plan file User Waypoint memory full Flight plan WPT(s) not found in database have been deleted Error writing flight plan data to data card Unable to save a flight plan backup Unable to convert flight plan data after DB update, all user flight plans deleted Battery Low Aviat
AV8OR User’s Guide Messages Function Aviation Mode Operation The checklists can only be created, edited and deleted on a PC and then transferred to the SD card. In order to create a valid checklist and allow the software to find the checklists the following rules must be followed: • The Checklists must be stored in the \GoFly\data\user\Notepads directory on the SD card. • Checklists must be text files. • The filename must have the .txt extension. (Example is “emergency.
AV8OR User’s Guide Messages Function Aviation Mode Operation When checklists are available, tap on the NOTE PAD soft key to show a menu of the available checklists. Figure 3-93: Notepad Page Highlight a checklist and tap the SELECT soft key to display the checklist. Figure 3-94: Checklist Page Tap the PREV PAGE soft key to return to the Notepad Page. Tap the CHECK BOX soft key to put a check mark in the first checkbox. Tap the SKIP CHECK soft key to skip to the next check box.
AV8OR User’s Guide System Setup Function Aviation Mode Operation SYSTEM SETUP FUNCTION Tap the System Setup soft key on the Aviation Main Menu page to enter the System Setup Menu page, as shown in Figure 3-95. Figure 3-95: System Setup - System Setup Menu Page The System Setup Menu allows the user to set parameters for items that show in the menu. Tap and highlight an item in the menu list and tap the SELECT soft key to enter the corresponding item’s setup page.
AV8OR User’s Guide System Setup Function Aviation Mode Operation General System Setup The General System Setup page is shown in Figure 3-96. Tap the desired item in the left list column and the associated value field is highlighted in the right column. Figure 3-96: System Setup – General System Setup Options Double tap the highlighted value item or tap on the EDIT soft key to display a pop up window to show the possible values that can be set.
AV8OR User’s Guide System Setup Function Aviation Mode Operation The following are the general system setup options and their possible values. • Aircraft Type: Select the appropriate host aircraft type: Fixed Wing or Rotary Wing. This determines the aircraft symbol that is used in VFR Moving Map mode. • Auto-Hide Keys on Map Page: When this option is turned ON and a value in seconds is set, all the soft keys on the VFR Moving Map page are automatically removed after the set time delay.
AV8OR User’s Guide System Setup Function Aviation Mode Operation in feet. When meters are selected, runway lengths are reported in meters. • Req Runway Surface: The options are ANY and HARD ONLY. The Required Runway Surface type is also used when using the DIRECT TO soft key to search for the nearest airports in VFR Moving Map mode. When runway surface is set to ANY, airports with either hard or soft runways are displayed.
AV8OR User’s Guide System Setup Function Aviation Mode Operation menu. Tap the RESET VALUES soft key to set all options to their factory initial settings except Minimum Elevation when it is currently set to a valid value. • Orientation: Sets the Map Mode presentation to either a TRACK UP or NORTH UP orientation. • Extended Track Line: Turns the extended track line ON or OFF. The extended track line is drawn ahead of the aircrafts present position in the direction of the present track.
AV8OR User’s Guide System Setup Function Aviation Mode Operation feet the options are: 1500ft, 2000ft, 2500ft, 3000ft, 4000ft, 5000ft, 6000ft, 7000ft, 8000ft, 9000ft and Maximum. There are four groups of features for each of the map layers. They are: Point Features, Line Features, Airspace and Overlay. Tapping the NEXT soft key displays the First feature screen: Point Feature Setup, as shown in Figure 3-99.
AV8OR User’s Guide System Setup Function Aviation Mode Operation Figure 3-101: Map System Setup – Airspace Setup Figure 3-102: Map System Setup – Overlay Setup To change values, double tap the highlighted value item or tap once on the item to highlight it and then tap on the Edit soft key and a pop up window shows the possible values that can be set. Highlight the desired value and double tap it or tap the Select soft key to finish the change.
AV8OR User’s Guide System Setup Function Aviation Mode Operation Figure 3-103: System Setup – Navigation Setup Tap the SAVE & EXIT soft key to save any changes. Tap the RESET VALUES soft key to restore most of the values to their factory initial settings. Double tap on an option or tap once on an option to highlight it and then tap on the EDIT soft key to display a pop up window to show the possible values that can be set.
AV8OR User’s Guide System Setup Function Aviation Mode Operation Local Offset. The system Global Positioning System (GPS) acquires the correct UTC time at Power-up and maintains it accurately.
AV8OR User’s Guide System Setup Function Aviation Mode Operation o HAD (Hawaii Daylight Saving Time) Offset from UTC -9:00 o SST (Samoa Standard Time) Offset from UTC 11:00 o SDT (Samoa Daylight Saving Time) Offset from UTC -10:00 • Offset from UTC: If the user sets Time Zone as Local, the Offset from UTC column can be configure. This method permits offsets of hours and 30-minute increments. • MAGNETIC VARIATION: Settings are Auto or Manual.
AV8OR User’s Guide System Setup Function • VSD Above Aircraft: o o • Aviation Mode Operation For Feet: 0500 to 2000 ft adjustable in 100 ft increments using the numeric keyboard (default = 1000 ft) For Meters: 150 to 600 .
AV8OR User’s Guide System Setup Function Aviation Mode Operation Figure 3-104: System Setup – Data Field Setup How to configure the Data Field windows: 1. Tap and highlight the desired left data window to modify the data field type. Note that the corresponding window in the Select Data Field Type table is also identified. The title of the selected active data window is highlighted in white with black lettering, and the data window is highlighted in shades of grey. 2.
AV8OR User’s Guide System Setup Function Aviation Mode Operation • ETE WPT: Est Time En Route • FLT TIME: Flight Time • GNDSPD: Ground Speed • GPS ALT: GPS Altitude • MSA: Minimum Safe Altitude • NEAR POS: Near Position Display • PPOS: Present Position • STP WTCH: Stop Watch • TIME: Time • TKE: Track Angle Error • TRACK: Actual Track • TTS: Track to Steer • WPT: Active WPT • XTK: Cross Track Error WIDE WINDOWS soft key controls the width of the data windows.
AV8OR User’s Guide System Setup Function Aviation Mode Operation Tap the RESET VALUES soft key to set all option to their factory defaults. Flight Plan Data Setup Flight Plan Data Setup page allows the user to set up the headers for the flight plan in the flight planning section. Figure 3-106: System Setup – Flight Plan Data Setup The ‘Flight Plan Data Column Setup’ table displays the current column headings for the flight plan data display.
AV8OR User’s Guide System Setup Function Aviation Mode Operation Figure 3-107: System Setup – Demo Mode Setup Scroll up and down between the options, and set the values. • Ident: Use the Ident field to assign a name to the Initial Position (manual entry). Highlight the Ident and enter the Ident input entry, the virtual keyboard is displayed. Input the Ident name characters. The system will search for similar Ident names in the database based on the character being input, as shown in Figure 3-108.
AV8OR User’s Guide System Setup Function Aviation Mode Operation Figure 3-109: System Setup – Demo Mode Setup Ident Details • Initial Position: Determines the latitude and longitude of where the simulator flight starts. The user can input the latitude and longitude. • Altitude: The simulators altitude can be set to any altitude between 0 and 99900 feet in 100-foot increments or between 0 and 30500 meters in 100-meter increments.
AV8OR User’s Guide System Setup Function Aviation Mode Operation Figure 3-110: Device Setup Menu The Position source port has the following Port options: • Internal (Default value) • Serial • Bluetooth The Position source can be configured as either NMEA (default value) or AR-NAV.
AV8OR User’s Guide System Setup Function Aviation Mode Operation Status Page From the System Setup Menu, tap the STATUS PAGE soft key to access the System Status Menu page, as shown in Figure 3-111. Figure 3-111: System Setup – Status Page The System Status Menu page gives information about the position source, software/database versions and system information. Internal GPS Status: The Internal GPS Status Page shows the GPS status in two tables, as shown in Figure 3-112.
AV8OR User’s Guide System Setup Function Aviation Mode Operation External Position Source Status: The External Position Source Status page displays the reported status of the external GPS receiver. (Only available if an external position source is configured) The Communication Status window is updated regularly. Figure 3-113: System Setup – External GPS Status Software and Database Versions: The Software and Database Versions Page shows the software status in tables, as shown in Figure 3-114.
AV8OR User’s Guide System Setup Function Aviation Mode Operation Flight Log Start Time: The UTC time at the beginning of the flight. Flight Log End Time: The UTC time at the end of the flight. Run Time: The total time of the flight. Cycles: The number of power cycles. Event Codes: A list of Events. Figure 3-115: System Information Page Shut Down Tap the soft key on the Aviation Main Menu page to go to the Program Close page.
AV8OR User’s Guide System Setup Function Aviation Mode Operation Figure 3-116: Power Off Pub. No D200803000008 Page 3-92 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide 4. Automotive Mode Operation AUTOMOTIVE MODE OPERATION WARNINGS AND SAFETY INFORMATION Go Drive is a navigation system that helps you find your way to your destination with a connected GPS receiver. Go Drive does not transmit your GPS position; others cannot track you. It is important that you look at the display only when it is safe to do so. If you are the driver of the vehicle, we recommend that you operate Go Drive before you start your journey.
AV8OR User’s Guide Automotive Mode Operation GLOSSARY 2D/3D GPS reception The GPS receiver uses satellite signals to calculate its (your) position and need at least four signals to give a three-dimensional position, including elevation. Because the satellites are moving and because objects can block the signals, your GPS device might not receive four signals.
AV8OR User’s Guide Automotive Mode Operation This is the orientation in 2D map view mode and in Overview mode. See also: Track-up map orientation. Overview mode You can instruct Go Drive to automatically switch to Overview mode if the next route event is in a distance. In Overview mode the map is shown in 2D but scaled down to a predefined zoom level. When you approach the next route event, the previous 2D or 3D map view returns automatically.
AV8OR User’s Guide Automotive Mode Operation GETTING STARTED From the Main Menu (refer to Figure 4-1), tap the key to start the Go Drive Automotive Navigation program. soft Figure 4-1: AV8OR Main Menu When Go Drive is started the first time, you need to do the following: • Select the written language of the application. Later you can change it in the Settings Menu section. • Select the language and speaker used for voice guidance messages. Later you can change it in Settings Menu section.
AV8OR User’s Guide Automotive Mode Operation Figure 4-2: Simple Mode Figure 4-3 displays the Navigation menu in Advanced mode: Figure 4-3: Advanced Mode The typical way of using Go Drive is to select a destination, and start navigating. You can select your destination in the following ways (not all of them are available in Simple mode): • • Use the selected location on the map.
AV8OR User’s Guide • • • Automotive Mode Operation streets . Enter an address with postal code. This way you do not need to select the name of the settlement and the search for street names might be faster as well. Use a coordinate. Use a saved location: o A Favorite o A POI o The History of previously set destinations and waypoints. Simple and Advanced modes The two operating modes of Go Drive mainly differ in the menu structure and the number of available features.
AV8OR User’s Guide Automotive Mode Operation Type of action Available in Simple mode Available in Advanced mode Yes Yes Yes Yes Yes Yes Navigating to an incomplete address Navigating to an intersection Navigating to recent destinations (History) Navigating to Favorites Yes Yes Navigating to a POI Yes Yes Navigating to coordinates No Yes Creating a multi-point route Saving a map point as a Favorite destination Saving a map point as a POI Saving a map point as a location of a Road Safety C
AV8OR User’s Guide Type of action Automotive Mode Operation Available in Simple mode Available in Advanced mode volume Route Planning options Yes Yes Regional settings Only language selection No Yes Warnings Yes Soft Keys and Controls on the screen You only need to confirm selections or changes in Go Drive if the application needs to restart, it needs to perform a major reconfiguration, or you are about to lose some of your data or saves and applies the new settings settings.
AV8OR User’s Guide Type Automotive Mode Operation Example List Description When you need to select from several options, they appear in a list. How to use it Turn the page with the and soft Keys and tap the value that you want. Slider When a feature has several different unnamed values, Go Drive shows an indicator on a gauge that displays and sets a value from a range. Switch When there are only two choices, a checkmark shows whether the feature is enabled. Pub.
AV8OR User’s Guide Type Automotive Mode Operation Example Virtual keyboard Description Alphabetic and alphanumeric keyboards to enter text and numbers. How to use it Each key is a touch screen soft Key. Using keyboards You only need to enter letters or numbers in Go Drive when you cannot avoid it. You can type with your fingertips on the full-screen keyboards and you can switch between various keyboard layouts, for example ABC, QWERTY, or numerical.
AV8OR User’s Guide Automotive Mode Operation Finalizing the keyboard entry Tap . Additional Controls Tasks Tapping and holding the screen Instructions You do not need this to access the basic navigation functions. Tap and keep pressing the following soft Keys to reach extra functions: • Tap and hold on the Map screen: you can set the minimum and maximum zoom level of Smart Zoom. • Tap and hold any of the soft Keys on the Map screen: you can set or reset the zoom value of the soft Key (2D map).
AV8OR User’s Guide Tasks Automotive Mode Operation Instructions • Gestures (drag & drop) Tap and hold or in long lists: you can turn the page continuously. • Tap and hold the soft Keys in the Quick menu to open screens from the Manage menu or the Settings menu related with the function of the soft Key. • • In portrait screen orientation there are symbols (instead of labels) on the soft Keys at the bottom of the screen.
AV8OR User’s Guide Automotive Mode Operation Figure 4-4: Map Screen For further information about the map screen, refer to the Map Screen section. CHECKING THE DETAILS OF A MAP LOCATION • If you are interested in the details of your current position during navigation: 1. Check the bottom line of the map. It shows the current street and house number information. 2. For further details, tap to open the Position menu. The address, the coordinate 3. Tap and the list of nearby POIs will be displayed.
AV8OR User’s Guide • Automotive Mode Operation It is even easier if you select the desired point in the Find menu. Then the Cursor menu opens automatically. You only need to tap the soft Key. MANIPULATING THE MAP Position markers on the map: Current GPS position: Selected location (Cursor): The following controls help you modify the map view to best suit your actual needs. Most of these controls appear only if you tap the map once, and disappear after a few seconds of inactivity.
AV8OR User’s Guide Action Automotive Mode Operation Soft Key(s) Opening/closing map control soft Keys Zooming in and out Tilting up and down Rotating left and right Pub.
AV8OR User’s Guide Action Automotive Mode Operation Soft Key(s) Viewing modes Description soft Key appears. Tap this soft Key to re-enable the automatic map rotation. Gives you the following map perspectives in Go Drive: • classic top-down view (2D) • • perspective view (3D) The value always shows the mode the soft Key switches to: If you are in 2D mode, the soft you can see Key and you need to tap it to switch to 3D mode.
AV8OR User’s Guide Icon Information If the icon is a static picture, route calculation is needed If the icon is animated, route, calculation is in progress , Next route event (next maneuver) , Automotive Mode Operation Details Action the view of the sky above you is shown with colored dots for each satellite. Some dots need to turn green to be able to navigate. GPS position and an active route are available, but automatic off-route recalculation is switched off, and you deviated from the route.
AV8OR User’s Guide Icon , Automotive Mode Operation Information There is no valid GPS position Details If there is no valid GPS position, this symbol appears here. Traffic restriction When GPS position is available, but there is no route to be navigated, the traffic restriction of the upcoming intersection is shown here if there is any When GPS position and an active route are both available, this field shows the route event that follows the next route event shown in the above described area.
AV8OR User’s Guide Icon Automotive Mode Operation Information Stops the running simulation Route recalculation progress Details Settings. This icon appears during Route Fly Over, Route Simulation, and Track Log playback. During route recalculation, this field shows the recalculation progress between 0% and 100%. Action Tap this area to stop the simulation. Nothing happens if you tap this area of the screen.
AV8OR User’s Guide Icon Automotive Mode Operation Description A part of the route is bypassed based on TMC events. A part of the route is mentioned in TMC events but could not be bypassed (for example, the destination is on a congested street). The Bluetooth radio is switched off. The Bluetooth radio is turned on, but no telephone is connected. There is an error in the Bluetooth connection. Go Drive is connected to a telephone as a hands free set via Bluetooth.
AV8OR User’s Guide Icon Automotive Mode Operation Type Time information More information There are time values that can be shown: • Current GPS time • Time remaining to reach the destination • Time remaining to reach the next via point • Estimated arrival time at the destination • Estimated arrival time at the next via point Distance information There are distance type values that can be shown: • Distance remaining to reach the destination • Distance remaining to reach the next via point • Current alti
AV8OR User’s Guide Icon Automotive Mode Operation Status for Vehicle type More information The symbol displays the vehicle type used for route calculation. USING THE CURSOR (THE SELECTED MAP LOCATION) First, place the Cursor at the desired map location with one of the following options: • Use the Find menu to select a location. The map returns with the selected point (the Cursor) in the middle, and the Cursor menu appears with the available options.
AV8OR User’s Guide Automotive Mode Operation Soft Key Action Saves the Cursor as a POI(available in Advanced mode only) Saves the Cursor as a Favorite location Saves the Cursor as a Road Safety Camera location (available in Advanced mode only) Marks the map with a Pin at the Cursor (available in Advanced mode only) Opens a screen with the name, address and coordinate information of the Cursor, and the list of POIs near it Advanced Functions SMART ZOOM Smart Zoom is a lot more than just a usual automatic
AV8OR User’s Guide Automotive Mode Operation zoom limits of Smart Zoom if necessary. POSITION MARKERS Current GPS Position and Lock-on-Road When your GPS position is available, Go Drive marks your current position with the icon on the map. The exact location of the position marker depends on the vehicle type used for route calculation. The vehicle type can be selected in Route settings or in the Quick Menu. • icon is at your exact GPS If you choose pedestrian: The position.
AV8OR User’s Guide Note ! Automotive Mode Operation Even if you move the map while you are driving, Go Drive continues navigating if there is an active route: it plays the voice instructions and displays the turn preview icons according to your current GPS position. Selected Location (Cursor) If you select a location in the Find menu, or you tap the map when the map control soft Keys are visible, the Cursor appears at the selected point on the map.
AV8OR User’s Guide Automotive Mode Operation DAYTIME AND NIGHT COLOR SCHEMES Go Drive uses different color schemes during the day and during the night. Daytime colors are similar to paper road maps. The night color schemes use dark colors for large objects to keep the average brightness of the screen low. Go Drive offers different daytime and night color schemes.
AV8OR User’s Guide • • • • • • • Automotive Mode Operation Permit Needed Motorways Toll Roads Charge Roads Ferries Cross-border Planning Carpool Lanes (appears only when used in the USA) Go Drive automatically recalculates the route if you deviate from the proposed itinerary. For further information about Route Planning options, refer to the Settings Menu section. ITINERARY The Itinerary is the list of the route events, that is, the driving instructions.
AV8OR User’s Guide • Automotive Mode Operation In Advanced mode, tap the following soft Keys: , , You have the following options on the Itinerary screen: Soft Key Description Any of the list items Opens the map with the selected maneuver in the middle. Changes the detail level of the Itinerary.
AV8OR User’s Guide Automotive Mode Operation TRACK LOGS Go Drive can log the track that you drive. A Track Log is a recording of how your GPS position changed and it is independent of the route that Go Drive calculated. Track Logs can be recorded, renamed, replayed, shown on the map, exported to a memory card in GPX format, and deleted. See page 69. Independently of the normal track log, you can instruct Go Drive to record the native GPS data received from the GPS device.
AV8OR User’s Guide Automotive Mode Operation intersections behind them. POIs are grouped into several levels of categories and subcategories. The icon of a POI that comes with the map shows the symbol of the POI category. If you save your own POI, you can select an icon for it independently of the POI category you have put it in. Saving POI To save a POI, place the Cursor ( tap the following soft Keys: ) at the desired location, then , , .
AV8OR User’s Guide Automotive Mode Operation Saving Road Safety Cameras To save the location of a Road Safety Camera, place the Cursor ( ) at the desired location, then tap the following soft Keys: , , . Camera Warning When you approach a Road Safety Camera with the warning enabled, the following happens: • • • Visible Warning: The type of the camera is displayed in the secondary Turn Preview field (for example).
AV8OR User’s Guide • • Automotive Mode Operation Audible Warning: If there is no speed limit given for the camera, or your speed is under the given speed limit, single beeps warn you about the camera. If you exceed the speed limit of the camera, the following also happens: o Visible Warning: A symbol with the speed limit appears in o ). the corner of the map (for example: Audible Warning: A special alert sound is played. There are different types of Road Safety Cameras.
AV8OR User’s Guide Symbol Automotive Mode Operation Type Red light Description warns you when you approach one of these speed cameras, but as you pass by, the warning stays on, and your average speed is measured until you reach another speed camera of this type. If your average speed exceeds the speed limit between the two speed cameras, you receive the same special warning sound as with the other speed camera types.
AV8OR User’s Guide Automotive Mode Operation The camera can check the speed in any direction. SPEED LIMIT WARNING Maps sometimes contain information about the speed limits of the road segments. This information may not be available for your region (ask your local dealer) or may not be fully correct for all roads on the map. You can configure Go Drive to warn you if you exceed the current limit. Tap the following soft Keys: , , , .
AV8OR User’s Guide • • • Tip! Automotive Mode Operation streets. Enter an address with postal code. This way you do not need to select the name of the settlement and the search for street names might be faster as well. Use a coordinate. Use a saved location: o A Favorite o A POI o The History of previously set destinations and waypoints. If you are going to use a route later, save it before you start navigating. Tap the following soft Keys: , , . SELECTING THE CURSOR AS THE DESTINATION 1.
AV8OR User’s Guide Automotive Mode Operation ENTERING AN ADDRESS OR PART OF AN ADDRESS If you know at least a part of the address, it is the quickest way to select the destination of the route. • Using the same screen, you can find an address by entering: • The exact address, including house number • The center of a settlement • An intersection • The midpoint of a street • Any of the above, starting the search with the postal code.
AV8OR User’s Guide or , Automotive Mode Operation (Advanced mode). 2. By default, Go Drive proposes the country and settlement where you are. If needed, tap the soft Key with the name of the ountry, and select a different one from the list. 3. If needed, change the settlement: • To select the settlement from the list of recently used ones, • soft Key. tap the To enter a new settlement: 1. Tap the soft Key with the name of the settlement, or if you have changed the country/state, tap . 2.
AV8OR User’s Guide Automotive Mode Operation 1. Tap . 2. Enter the house number on the keyboard. to finish entering the 3. Tap address. 6. The map appears with the selected point in the middle. Tap Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating. Entering an Address (North America, Australia) In some countries, the state is also used in addresses.
AV8OR User’s Guide Automotive Mode Operation country, and select a different one from new country, you also need to select the state, or tap settlement regardless of the state it is in. to search for a 3. If you have not changed the country, you still have the possibility to change the state. Tap the soft Key with the name of the state, and select from the list. 4. If needed, change the settlement: • To select the settlement from the list of recently used ones, • soft Key.
AV8OR User’s Guide Automotive Mode Operation 6. Enter the house number: . 1. Tap 2. Enter the house number on the keyboard. to finish entering the 3. Tap address. 7. The map appears with the selected point in the middle. Tap (Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating. Entering an Address if house numbering is restarted There are long roads where the house numbering is restarted at some point.
AV8OR User’s Guide Automotive Mode Operation . 2. Start entering the settlement name on the keyboard. 3. Get to the list of search results: o After entering a couple of characters, the names that match the string appear in a list. to open the list of Tap results before it appears automatically. 4. Pick the settlement from the list. o 4. Enter the street name: . 1. Tap 2. Start entering the street name on the keyboard. 3.
AV8OR User’s Guide Automotive Mode Operation Enter an Address without knowing the district/suburb Long roads can run across several districts or suburbs. You may not know if a particular house number is in which of them. In this case, follow the instructions below: The procedure is explained starting from the Navigation menu. 1. Tap the following soft Keys: , (Simple mode), or (Advanced mode). 2. By default, Go Drive proposes the country/state and settlement where you are.
AV8OR User’s Guide Automotive Mode Operation 1. Tap . 2. Start entering the street name on the keyboard. 3. Get to the list of results: o After entering a couple of characters, the names that match the string appear in a list. to open the list of Tap results before it appears automatically. 4. Instead of picking one of the streets, tap o 5. Enter the house number: . 1. Tap 2. Enter the house number on the keyboard. to finish entering the 3. Tap address. 6. A list appears with the matching addresses.
AV8OR User’s Guide Automotive Mode Operation country/state, and select a different one from the list. 3. If needed, change the settlement: • To select the settlement from the list of recently used ones, • soft Key. tap the To enter a new settlement: 1. Tap the soft Key with the name of the settlement, or if you have changed the country/state, tap . 2. Start entering the settlement name on the keyboard. 3.
AV8OR User’s Guide Automotive Mode Operation screen, their list appears automatically. 6. Tap the desired intersecting street in the list. 7. The map appears with the selected point in the middle. Tap (Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating. Selecting a City Center as the Destination The City Center is not the geometric center of the settlement but an arbitrary point the map creators have chosen.
AV8OR User’s Guide Automotive Mode Operation Tap to open the list of results before it appears automatically. 4. Pick the settlement from the list. o 4. Tap the soft Key. 5. The map appears with the selected point in the middle. Tap (Simple mode) or (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating.
AV8OR User’s Guide Automotive Mode Operation 4. Enter the street name: . 1. Tap 2. Start entering the street name on the keyboard. 3. Get to the list of results: o After entering a couple of characters, the names that match the string appear in a list. to open the list of Tap results before it appears automatically. 4. Pick the street from the list. o 5. Enter the house number: . 1. Tap 2. Enter the house number on the keyboard. to finish entering the 3. Tap address. 6.
AV8OR User’s Guide o o Automotive Mode Operation Search first for the street with a less common or less usual name; fewer letters are enough to find it. If one of the streets is shorter, search for that one first. You can then find the second one faster. • You can search for both the type and the name of a road.
AV8OR User’s Guide Automotive Mode Operation 1. Tap the following soft Keys: , (Simple mode), or (Advanced mode). 2. Select the area around which the POI should be searched: • • : The POI will be searched around a given address. : The map appears with the Cursor in the middle. Modify the location of the Cursor if necessary, then tap . The POI will be searched around the given location. • : The POI will be searched around the current GPS position.
AV8OR User’s Guide Automotive Mode Operation 4.
AV8OR User’s Guide Automotive Mode Operation 2. Tap 3. Select one of the saved criteria and the list of matching POIs appear. 4. Tap the desired POI in the list. 5. The map appears with the selected point in the middle. Tap (Simple mode) or 6. (Advanced mode) from the Cursor menu. The route is then automatically calculated, and you can start navigating. Selecting the destination from the History The destinations that you have set earlier appear in the History.
AV8OR User’s Guide Automotive Mode Operation explained starting from the Navigation menu. 1. Tap the following soft Keys: to change the format of 2. [optional] Tap the displayed coordinates. 3. Tap the latitude or longitude value to change the coordinate. 4. Enter the coordinate values in WGS84 format on the keyboard: the latitude (N or S) and the longitude (E or W). 5. Tap 6. The map appears with the selected point in the middle. Tap (Simple mode) or (Advanced mode) from the Cursor menu.
AV8OR User’s Guide Automotive Mode Operation 4. [optional] To add more points to the route, repeat the above steps as many times as you like. If you insert a via point in a route that is already a multi-point route, you will automatically be taken to the Edit Route screen where you can determine the position of the intermediate route point. When you enter the screen, the new via point is placed as the last via point before the final destination. The new point is the selected point in the list.
AV8OR User’s Guide Automotive Mode Operation the route. This feature is available in Advanced mode only. 1. Select a new location as you did in the previous sections. This will be the additional destination in the route. 2. The map appears with the selected point in the middle, and the Cursor menu opens automatically. to open the full Cursor menu with 3. Tap the additional functions. to add the point as a new final 4. Tap destination demoting the previous one to the last intermediate destination. 5.
AV8OR User’s Guide Automotive Mode Operation The selected point moves up in the list (becomes a via point to be reached earlier). Tap this soft Key repeatedly, and the point becomes the start point of the route. The selected point moves down in the list (becomes a via point to be reached later). Tap this soft Key repeatedly, and the point becomes the final destination of the route. The route is reversed.
AV8OR User’s Guide Automotive Mode Operation In Simple mode the last option is available only. Watching the Simulation of the Route This feature is available in Advanced mode only. The procedure is explained starting from the Map screen. 1. Tap the following soft Keys: 2. The Route menu appears. There are two ways of running the route simulation: • to run the simulation at high Tap speed to give you a quick overview of the route.
AV8OR User’s Guide Automotive Mode Operation Tap the following soft Keys: , , , . Pausing the Active Route You do not need to pause the active route: when you start driving again, Go Drive restarts the voice instructions from your position.
AV8OR User’s Guide Automotive Mode Operation repeatedly until all via points disappear and the whole route. soft Key appears. Tap it to cancel the Using Track Logs Go Drive can record the track (how your GPS position changed) that you drive. Tip! You do not need to select a destination and create a route for this; you can also record your driving path while cruising. This feature is available in Advanced mode only. The procedure is explained starting from the Map screen.
AV8OR User’s Guide Automotive Mode Operation 1. Tap the following soft Keys: , , 2. Locate the desired Track Log, and then tap the next to it. soft Key 3. The map returns, and the Track Log simulation (a life-like replay) begins. 4. You can stop the replay any time by tapping the soft Key. Changing the color of a Track Log 1. Tap the following soft Keys: 2. Tap the desired Track Log and then tap one of the color soft Keys. Saving a Route This feature is available in Advanced mode only.
AV8OR User’s Guide • • Automotive Mode Operation saved, but if it needs to be recalculated, the current TMC information will be used in the new route. If you updated your map since you first saved the route, Go Drive recognizes the change, and recalculates the driving instructions according to the latest available map information. Go Drive deletes from the route the via points that you already left behind during navigation together with the road segments used to reach it.
AV8OR User’s Guide Automotive Mode Operation REFERENCE BOOK (ADVANCED MODE) On the following pages you will find the description of the different menu screens of Go Drive in Advanced mode. In Simple mode, these functions work the same way, but only a few of them are available. The Navigation menu: Go Drive starts with the Navigation menu. From there you can access the following screens: Screen Soft Key Description Map The Map screen.
AV8OR User’s Guide Automotive Mode Operation Map Screen The most important and most often used screen of Go Drive is the Map screen. Figure 4-8: Map Screen Advanced Mode During navigation, the screen shows route information and trip data (left screenshot), but when you tap the map, additional soft Keys and controls appear for a few seconds (right screenshot). Most parts of the screen behave as soft Keys.
AV8OR User’s Guide Automotive Mode Operation Symbol Name Action GPS position quality Vehicle used in route calculation Opens the Quick menu Opens the Quick menu Top row Next street n/a Bottom row Current street and house numbers on left and right Map view modes n/a , Switches between 2D and 3D map modes Menu Opens the Navigation menu Detour Opens the Detour screen, two ways of modifying the route: • the list of Saved Search Criteria • a soft Key to avoid parts of the route Position menu
AV8OR User’s Guide Automotive Mode Operation Symbol , Name Action Cursor menu (appears when there is no GPS position or the Cursor is not at the current GPS position) Opens the Cursor menu Open/Close Map control soft Keys Tap this soft Key to show or hide the following map control soft Keys: • Zoom in/out • Rotate left/right (3D map only) • Tilt up/down (3D map only) • Zoom preset soft Keys (2D map only) • Tilt and zoom preset soft Keys (3D map only) • Return to GPS position soft Key • Smart Zoom s
AV8OR User’s Guide Automotive Mode Operation Symbol Name Action Return to GPS position (appears when GPS position is available and you have moved the map) Tap this soft Key to move the map back to the current GPS position. If the map has been rotated in 3D mode, automatic map rotation is also re-enabled. Tap this soft Key once to enable Smart Zoom. Tap&hold the soft Key to set the zoom limits of Smart Zoom.
AV8OR User’s Guide Automotive Mode Operation Symbol Name Action Tilt preset soft Keys (available in Advanced mode only) Tap one of the preset soft Keys to set the tilt and zoom levels to fix, predefined values. Smart Zoom is disabled. These soft Keys are available in 3D mode. Tap&hold any of the soft Keys to set its value to the current tilt and zoom levels, or to reset it to its original value.
AV8OR User’s Guide • • • Automotive Mode Operation Track log recording status TMC reception and processing status Bluetooth connection and communication status Battery, GPS Position Quality, Vehicle Type Indicator This is a complex indicator, and a soft Key that opens the Quick menu. The battery part shows information about the rechargeable battery of the device. Icon Description The battery is charging. The device runs on external power. The battery is not charging but it is full.
AV8OR User’s Guide Icon Automotive Mode Operation Description Only a few satellites are received. Position information is available, but elevation (altitude) cannot be calculated. GPS navigation is possible, but the position error may be significant. Altitude information is available, the position is a 3D position. GPS navigation is possible. The remaining part of the field shows the vehicle type used for route calculation.
AV8OR User’s Guide Icon Automotive Mode Operation Description The sound output of Go Drive is muted. Icon Description The sound output of Go Drive is enabled. Go Drive records a Track log when GPS position is available. Track log recording is disabled. No TMC receiver is connected or TMC is turned off. TMC receiver is connected and a radio station with TMC broadcast is received. There are new, unread TMC events. A part of the route is bypassed based on TMC events.
AV8OR User’s Guide Automotive Mode Operation Next two Route Events (Turn Preview fields) There are two fields reserved on the Map screen to display the next two maneuvers (route events that are listed in the Itinerary). Both the type of the event (turn, roundabout, exiting motorway, etc.) and its distance from the current GPS position is displayed. Most of these icons are very intuitive and you also know them as road signs. The following table lists some of the frequently shown route events.
Icon Description Keep left. , User’s Guide AV8OR Automotive Mode Operation Continue straight in the intersection. , , Enter roundabout. The number of the exit is shown in the circle, but only for the next turn. Enter motorway. , Exit motorway. , Board ferry. , Leave ferry. , Approaching the next via point. , Approaching the destination. , In certain situations when route events are not important, these fields show other useful pieces of information.
AV8OR User’s Guide Symbol Automotive Mode Operation Name Description Current GPS position Cursor (selected location) Start point Via point Pub. No D200803000008 Your current position displayed on the map. • In pedestrian mode it is the exact GPS position. • If a vehicle is selected for route calculation, the arrow is put on the nearest road. map The location selected in the Find menu, or a map point selected by tapping the map. The first point of the route.
AV8OR User’s Guide Symbol Automotive Mode Operation Name Description via points as you want. Destination (end point) Symbol The last point of the route, the final destination. Name Description Route color The route always stands out with its color on the map, both in daytime and in night color mode. The active leg of the route is always displayed in a brighter shade than the inactive (upcoming) legs. The section of the route on which you are driving.
AV8OR User’s Guide • Automotive Mode Operation On the main part of the screen you can see the first page of Saved Search Criteria. Select any of the criteria to quickly receive the list of nearest matching POIs, and instantly plan a new route to the desired one, or insert it as a via point in your active route. In Advanced mode more soft Keys appear at the bottom: • o : If you want to bypass a part of the route starting from the next intersection, tap this soft Key, and select a distance to bypass.
AV8OR User’s Guide Automotive Mode Operation Soft Key Description Zooms in the map. With the Cursor menu open, you can still move or scale the map, and tap the map anywhere to place the Cursor to a new location, but when you use this soft Key, the Cursor jumps back to the place where it was at the time when you opened the Cursor menu. Displayed at the Cursor if it is at the same location with which the Cursor menu was opened.
AV8OR User’s Guide Automotive Mode Operation Soft Key Description If the Cursor is at or near one of the via points, this soft Key replaces the previous one, and deletes the selected via point from the route. The route is recalculated without the deleted point. The Cursor is appended at the end of the route as the new destination. The previous destination is demoted, and becomes the last via point.
AV8OR User’s Guide Soft Key Automotive Mode Operation Description If the Cursor is at or near a Pin, this soft Key replaces the previous one, and deletes the Pin the Cursor is near to. The Cursor is saved as the location of a Road Safety Camera (speed camera or red light camera). A new screen appears where you can set the type of the camera, the direction of the measured traffic, and the speed limit checked (if applicable).
AV8OR User’s Guide • Automotive Mode Operation In Advanced mode, from the Navigation menu tap the following soft Keys: , . Figure 4-9: Route Information Screen In the top section of the screen you see information about the current route. The fields on this screen are continuously updated while you keep the screen open. When you open the screen, all fields contain information about reaching your final destination.
AV8OR User’s Guide Automotive Mode Operation Name Description Function Estimated Arrival Shows the estimated arrival time at the final destination of the route based on information available for the remaining segments of the route. The calculation cannot take into account traffic jams and other possible delays. Shows the distance you need to travel on the route before reaching your final destination. Tap this field to change the content of all data fields to via point information.
AV8OR User’s Guide Name Automotive Mode Operation Description Function route. These are warnings, so icons always show information for the whole route, even if the data fields display values from your current position to a via point only. Appears only if at least one via point exists. Appears only if there are no via points in the route. Opens the Route Planning options screen from theSettings menu. Opens the map screen designed for route planning. Deletes the next via point from the route.
AV8OR User’s Guide Automotive Mode Operation Figure 4-10: Trip Information Screen The fields on this screen are continuously updated while you keep the screen open. When you open the screen, all route data fields contain information about reaching your final destination. Tap and the fields concerning your route display data for the next via point. Tap the soft Key repeatedly to toggle between the two possibilities.
AV8OR User’s Guide Name Turn Preview Compass Speedometer Distance Remaining Time Remaining Pub. No D200803000008 Automotive Mode Operation Description Function Shows the type and distance of the next route event. Shows the current heading. Shows the current speed both graphically and as a number. Shows the distance you need to travel on the route before reaching your final destination.
AV8OR User’s Guide Name Arrival Time GPS Time Altitude Speed Limit Pub. No D200803000008 Automotive Mode Operation Description Function Shows the estimated arrival time at the final destination of the route based on information available for the remaining segments of the route. The calculation cannot take into account traffic jams and other possible delays. Shows the current time corrected with time zone offset.
AV8OR User’s Guide Name Automotive Mode Operation Description Function Tap this soft Key to change the content of the Route Data fields to show information about the next via point. If you tap the previous soft Key, this one replaces it. Tap this soft Key and the Route Data fields show information about the final destination again. Most of the fields on this screen have a symbol next to them. This symbol shows whether the field it is attached to is shown on the map as a Trip Data.
AV8OR User’s Guide Automotive Mode Operation . The fields on this screen are continuously updated while you keep the screen open. You can switch between the trips, pause then resume them, or reset their data. You have the following functions on this screen: Name Description Pauses the trip currently shown on the screen. Values on the screen stop changing. This soft Key replaces the previous one if it has been activated. Tap it to resume collecting trip data.
AV8OR User’s Guide Automotive Mode Operation Figure 4-11: Quick Menu If you tap any of the switches in the Quick menu except for the Vehicle type, the Map screen immediately returns. A switch is on if its lamp is lit. The Vehicle type soft Key is different. It is a multi-value soft Key. It opens a list of available choices, and the symbol of the selected vehicle is shown on the soft Key. Name Main function Function (tap (single tap) and hold) Master Volume slider Pub.
AV8OR User’s Guide Name Pub. No D200803000008 Automotive Mode Operation Main function (single tap) Function (tap and hold) Switches between the daytime and night color schemes manually. This will not disable the automatic switching between the two schemes: the other color scheme returns at the next scheduled time. 3D buildings can be displayed on the map. Use this switch to suppress them temporarily. Tap this soft Key and select the Vehicle type to be used for route calculation.
AV8OR User’s Guide Name Automotive Mode Operation Main function (single tap) Function (tap and hold) receiver detection is automatic). When a TMC receiver is connected to Go Drive, this soft Key opens the list of TMC messages, and provides access to the TMC Settings and the radio station settings screens. Opens the Bluetooth settings screen. No action. No action. GPS DATA SCREEN Tap the following soft Keys: to open the GPS Data screen and to see the status of the GPS reception. Pub.
AV8OR User’s Guide Automotive Mode Operation Figure 4-12: GPS Status Icon Color Green Name GPS position quality indicator Yellow Pub. No D200803000008 Page 4-89 Description Go Drive has a connection to the GPS receiver and GPS position information is available in 3D: Go Drive can calculate both your horizontal and vertical GPS position.
AV8OR User’s Guide Icon Automotive Mode Operation Color Name Description position. Grey Go Drive has a connection to the GPS receiver but GPS position information is not available. Red Go Drive has no connection to the GPS receiver. Green, blinking GPS connection quality Yellow, blinking indicator Red, blinking Pub. No D200803000008 Page 4-90 Go Drive is connected to the GPS receiver. Go Drive has no connection to the GPS receiver but it is still trying to establish a connection.
AV8OR User’s Guide Icon Automotive Mode Operation Color Name Sky view circle The virtual sky shows the visible part of the sky above you, with your position as the center. The satellites are shown at their current positions. The GPS receives data from both the green and yellow satellites. Signals from the yellow satellites are only received, while green ones are used by the GPS to calculate your current location. Your current GPS position in WGS84 format.
AV8OR User’s Guide Automotive Mode Operation Soft Key Description If you know at least a part of the address, this is the quickest way to find the location. You can select your destination from the thousands of POIs included with Go Drive or from the ones you have previously created. The destinations that you have already entered in Go Drive are available in the History list. You can select your destination by entering its coordinates.
AV8OR User’s Guide Automotive Mode Operation Soft Key Description You can browse the driving instructions that Go Drive follows during navigation. You can exclude maneuvers or streets to adjust the route to your preferences. You can modify the route: remove route points or change their order. Erase the active route with all its route points (start point, via points and destination). If you later decide that you need the same route, you will have to rebuild it from scratch.
AV8OR User’s Guide Automotive Mode Operation Soft Key Description Renaming or deleting saved routes Deleting History items Recording, simulating, renaming or deleting track logs, assigning color to them to be shown on the map Renaming or deleting Favorites Creating, updating or deleting POIs Creating, updating or deleting POI groups Modifying POI visibility settings Creating, renaming or deleting Saved Search Criteria MANAGE SAVED ROUTES You can manage the previously saved routes.
AV8OR User’s Guide Automotive Mode Operation MANAGE HISTORY You can manage the list of locations you used lately. Tap the following soft Keys: , , Soft Key . Description Deletes the selected item in the History. Deletes the entire History. Turns the page for additional list items. , MANAGE TRACK LOGS You can record Track Logs, then play them back, display them on the map, and see their details. Tap the following soft Keys: , , . Soft Key Soft Key with the name of the track log Pub.
AV8OR User’s Guide Automotive Mode Operation Turns the page for additional list items. , When track log details are shown: Soft Key Soft Key with the name of the Track Log Description Opens a keyboard screen to let you rename the Track Log. Tap this soft Key to hide the Track Log on the map. No color will be assigned to the Track Log. Tap one of the colored soft Keys to assign a color to the Track Log. The Track Log will be shown on the map with this color. The map returns with the Track Log.
AV8OR User’s Guide Automotive Mode Operation Clears the list of Favorites'. Turns the page for additional list items. , MANAGE POIS You can manage your POIs, and set the POI visibility for both your POIs and the ones that came with the product. Tap the following soft , Keys: , . Soft Key / Icon Description Soft Key with the name of the POI group Soft Key with the name and address of a POI item Opens the list of the subgroups of this POI group. The new list behaves the same as this one.
AV8OR User’s Guide Automotive Mode Operation Soft Key / Icon Description This POI group contains POIs that you saved. When a POI group is open for editing: Soft Key , Description Items in the POI group will not be shown on the map. The distance soft Keys set the zoom level from which the items in the POI group will be shown on the map. Subgroups under the edited POI group will inherit its visibility settings.
AV8OR User’s Guide Soft Key Automotive Mode Operation Description Tap this soft Key to delete the selected POI. Tap this soft Key to move the POI to another POI group or subgroup. MANAGE SAVED SEARCH CRITERIA You can manage the list of search criteria previously saved to easily find frequently searched POI types. Tap the following soft Keys: , , . Soft Key Description Soft Key with the name of the Saved Search Criteria Tap to rename the saved query. Deletes the selected item in the list.
AV8OR User’s Guide , Automotive Mode Operation , . Soft Key Description Remove Pins Map locations can be marked with Pins using Backup User Data Restore User Data Delete User Data Reset Factory Settings the soft Key in the Cursor menu. Tap this soft Key to remove all your Pins from the map. All user data and the current settings will be saved on the inserted memory card. There is always one backup file.
AV8OR User’s Guide Automotive Mode Operation Figure 4-13 Settings Menu Soft Key Description You can fine-tune the appearance and content of the Map screen. You can adjust the sounds of Go Drive. These settings determine how routes will be calculated. These settings allow you to adjust the application to your local language, measurement units, time and date and their formats, as well as choose the voice guidance profile you prefer. You can control how Go Drive behaves during navigation.
AV8OR User’s Guide Soft Key Automotive Mode Operation Description You can set up the connection to the TMC receiver. If the TMC receiver is working, you can select the radio station to be received. You can modify the look and behavior of the Menu screens. Soft Key Description You can change some device settings to control the screen backlight when Go Drive is running. You can set up an automatic Track Log saving, and fine-tune its settings. This screen has no navigation feature.
AV8OR User’s Guide Automotive Mode Operation Tap the following soft Keys: Soft Key Color Profiles Elevation on 2D Map , , . Description Go Drive is able to show the map and the menus in different colors during the day and during the night. Select the color profiles to be used in each mode, and select the automatic or manual switching between the daytime and night color profiles. 2D maps can also display 3D information. These top-down maps can display elevation by colors and shading.
AV8OR User’s Guide Automotive Mode Operation Soft Key Description Master Volume Use the switch to mute all sounds of the device and then to re-enable them again. The position of the fader determines the volume level. The loudness of Go Drive is independent of your device settings. When you exit the program, the device default settings return. Voice Guidance Volume The slider adjusts the loudness of voice prompts.
AV8OR User’s Guide Automotive Mode Operation Soft Key Vehicle Road Types Used for Route Planning Route Calculation Method Use Traffic Information Description You can set the type of vehicle you will use to navigate the route. Based upon this setting, some of the road types will be excluded from the route (e.g. motorways for pedestrians), or some of the restrictions may not be taken into account (e.g. emergency vehicles have only a few restrictions).
AV8OR User’s Guide Automotive Mode Operation Soft Key Recalculate to Avoid Traffic Description This setting determines how Go Drive uses the received TMC information in route recalculation: • Automatic: When route recalculation becomes necessary based on the received TMC events, Go Drive recalculates the route automatically. • Manual: When route recalculation becomes necessary based on the received TMC events, Go Drive notifies you, but you can decide whether to recalculate the route or not.
AV8OR User’s Guide Automotive Mode Operation Type Permit needed Ferries Crossborder planning Carpool lanes Description You might need a permit or permission from the owners to use certain roads or to enter certain areas. Go Drive excludes these roads from the route calculation by default. Go Drive includes ferries in a planned route by default. However, a map does not necessarily contain information about the accessibility of temporary ferries. You might also need to pay a fare on ferries.
AV8OR User’s Guide Automotive Mode Operation REGIONAL SETTINGS These settings allow you to adjust the application for your local language, measurement units, time and date and their formats, as well as choose the voice guidance profile you prefer. Tap the , following soft Keys: , Soft Key Program Language Voice Profile Units Set Date & Time Format Time and Time Zone Settings . Description This soft Key displays the current written language of Go Drive.
AV8OR User’s Guide Soft Key Auto Time Correction to GPS Use Auto Time Zone Set Time Zone Compare GPS and device times Automotive Mode Operation Description Use this feature to synchronize the clock of your device to the very accurate time provided by the GPS receiver. Use this feature to synchronize the time zone of the clock of your device to the time zone based on your current GPS position. This is useful if you travel abroad.
AV8OR User’s Guide Automotive Mode Operation Soft Key Description Off-route Recalculation Restore Lock-toPosition Automatic Overview This switch tells Go Drive whether to automatically recalculate the route when you deviate from it. If this feature is turned off, you need to initiate route recalculation manually otherwise navigation will be stopped until you return to the originally recommended route.
AV8OR User’s Guide Automotive Mode Operation Soft Key Warn When Speeding Description Maps may contain information about the speed limits of the road segments. Go Drive is able to warn you if you exceed the current limit. This information may not be available for your region (ask your local dealer), or may not be fully correct for all roads in the map. This setting lets you decide whether you wish to receive the warnings.
AV8OR User’s Guide Automotive Mode Operation Soft Key Description Warn if Too Fast for a Pedestrian Enable this warning to be alert if pedestrian mode is activated and you drive fast. You are asked if you want to change to car navigation mode. This way you can be sure you will not be routed via one-way roads in the wrong direction as a pedestrian could, for example. Safety Mode disables the touch screen above 10 km/h (6 mph) to keep your attention on the road.
AV8OR User’s Guide Automotive Mode Operation MENU SETTINGS You can modify the look and behavior of the Menu screens. Tap the following soft Keys: , Soft Key , . Description Animation You can activate and deactivate the Menu animations. When animation is turned on, soft Keys on Menu and keyboard screens appear in an animated way. Background You can choose the image to be used as the menu background image. Skin You can choose from a list of available skins to change the look of Go Drive.
AV8OR User’s Guide Automotive Mode Operation Soft Key Power Management Backlight Intensity at Daytime Backlight Intensity at Night Autorun Enabled Set Screen Orientation Description You can set how the backlight will behave when the screen has not been touched for a while. You have the following options: • Backlight Always On: The screen is continuously lit. • Use Device Settings: The backlight settings of the device will be applied in Go Drive.
AV8OR User’s Guide Automotive Mode Operation Soft Key Update Interval Enable Auto-saving Track Log Database Size Track Logs Max. Size Create NMEA/SIRF Log Description This is how often track points will be saved. Position information is normally received once a second from the GPS. If you do not need such a detailed log, you can increase this number to save track log space. When auto-saving is enabled, you do not need to turn track log saving on and off manually.
8OR User’s Guide 5. Multimedia MULTIMEDIA The all-in-one versatile AV8OR provides several multimedia programs, such as listening to music, viewing photos, watching a movie and reading an Ebook. Tap the icon on the Main Menu (Refer to Figure 2-7) to go to the Multimedia menu page. Figure 5-1: Multimedia Menu MUSIC PLAYER To enter the music player service, tap the Multimedia menu. icon on the The Music program opens to the default Multimedia/music folder on the SD card as shown in Figure 5-2.
8OR User’s Guide Multimedia Figure 5-2: Music Player - Searching for a Music File Double tap on a music file to select and play it. Figure 5-3: Music Player - Playing Music Tap the icon to return to the Multimedia menu page. PHOTOS To enter the photo browser service, tap the Multimedia menu. icon on the The Photo program opens to the default Multimedia/photo folder on the SD card as shown in Figure 5-4. The photo browser supports the following image formats: Pub.
8OR User’s Guide • BMP • JPG • GIF • PNG Multimedia Figure 5-4: Photo Browser – Searching for a Photo Double tap on a picture to display it. Figure 5-5: Photo Browser - Viewing a Photo Tap the icon to return to the Multimedia menu page. Pub. No D200803000008 Page 5-3 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
8OR User’s Guide Multimedia MOVIE PLAYER To select a movie to view, tap the menu page. icon on the Multimedia The Movie program opens to the default Multimedia/movies folder on the SD card as shown in. The movie player supports the following video formats: • AVI • WMV • MPG • ASF Figure 5-6: Movie Player - Searching for a Movie Double tap on a movie file to play the movie. Pub. No D200803000008 Page 5-4 Revision July 2008. © Honeywell International Inc.
8OR User’s Guide Multimedia Figure 5-7: Movie Player - Playing a Movie Tap the icon to return to the Multimedia menu page. EBOOK READER To read an Ebook, tap the icon on the Multimedia menu. The Ebook program opens to the default Multimedia/ebooks folder on the SD card. Figure 5-8: EBook Reader – Searching for a Book Double tap on one of the Ebook files to open in the Ebook reader. Pub. No D200803000008 Page 5-5 Revision July 2008. © Honeywell International Inc.
8OR User’s Guide Multimedia Figure 5-9: Ebook Reader Tap the icon to return to the Multimedia menu page. DOWNLOADING MULTIMEDIA FILES Refer to the Downloading files from PC section in chapter 7 Appendix for instructions on how to download multimedia files to the AV8OR. Pub. No D200803000008 Page 5-6 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide 6. System Settings SYSTEM SETTINGS The user can customize how the AV8OR operates and adjust system settings in the Settings page. Tap the the Main Menu page to enter the Settings page. soft key on Figure 6-1: Settings Page Tap the soft key to return to the Main Menu. GPS STATUS To enter the GPS status page, tap the “GPS Status” soft key on the Settings page. This option should only be used if the Go Fly or Go Drive Navigation Applications are not running.
AV8OR User’s Guide System Settings Figure 6-2: Backlight Page Backlight control bar To increase volume, tap the the icon. To decrease volume, tap icon. You can also drag the tap either side of the soft key left or right or bar. Backlight shutdown setting Select the wait time to turn off the backlight from the “Shut down the backlight” list. Tap the icon to return to the Settings page. VOLUME Tap the “Volume” soft key on the Settings page to enter the Volume page.
AV8OR User’s Guide System Settings volume on the volume page, first set the volume control to maximum (up). Refer to Figure 6-3. Figure 6-3: Volume Control Enable/disable audio output Tap the icon to enable or disable the audio output. Volume control bar To increase volume, tap the the icon. To decrease volume, tap icon. You can also drag the tap either side of the Tap the soft key left or right or bar. icon to return to the Settings page.
AV8OR User’s Guide System Settings Figure 6-4: System Info Screen BLUETOOTH To enter the Bluetooth page, tap the “Bluetooth” soft key on the Settings page. Figure 6-5: Bluetooth Main Page To pair to a device with Bluetooth, do the following steps: • Prepare your Bluetooth device to be discovered. • Tap on the Pub. No D200803000008 Icon to open the Bluetooth manager. Page 6-4 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide System Settings Figure 6-6: BlueTooth Manager • Double tap on “Explore a Bluetooth Device”. This will initiate a search for other Bluetooth devices. While the search is in progress, the following page is displayed. Figure 6-7: BlueTooth - Search in Process • Double tap on the device to pair. Pub. No D200803000008 Page 6-5 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide System Settings Figure 6-8: Bluetooth Device Explorer • Click on the service to use (i.e. SPP Slave) and then click on the link icon . Figure 6-9: Bluetooth Service Browser • The page will look like Figure 6-10: Bluetooth Devices Paired when connection is established. Pub. No D200803000008 Page 6-6 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide System Settings Figure 6-10: Bluetooth Devices Paired Pub. No D200803000008 Page 6-7 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide 7.
AV8OR User’s Guide Appendix I ICAO International Civil Aviation Organization ID identification IFR instrument flight rules INT internal K KMH kilometers per hour L LAT latitude LCD liquid crystal display LON longitude LONG longitude LTNG lightning M M meters MFD multifunction display MGRS military grid reference system MOD modification MPH statute miles per hour MSA minimum safe altitude MSL Mean sea level ??? N NAV navigation NAVAID Navigation/al Aid NCD non-computed data NDB non-directional beacon NM na
AV8OR User’s Guide Appendix S SBY standby SPD speed SSM Sign status matrix STBY standby STRK strike SUA special use airspace SV# Space vehicle number (GPS satellite number) T TA traffic alert TAU protective area around aircraft TCAS Traffic alert and collision avoidance system TIS traffic information service TOPO topographical data (i.e.
AV8OR User’s Guide Appendix DOWNLOADING FILES FROM PC Use the included PC/USB cable (part number 005-03702-0004) to attach from the AV8OR to a USB port on a P/C. Refer to the http://www.bendixing.com website for instructions on how to download files from the PC to the SD card in the AV8OR.
AV8OR User’s Guide Appendix CONNECTION TO AN EXTERNAL GPS SOURCE The AV8OR will accept external GPS source data via the RS 232 interface and can be used as a non-certified display of GPS data. Below is a list of a few RS 232 GPS units that have been evaluated Reminder: The AV8OR only provides for one RS 232 interface.
AV8OR User’s Guide Appendix Figure 7-1: External GPS Setup Screen The interconnect between the Bendix/King KLN 94 and the AV8OR is as follows: KLN 94 Pin Out P941-2 P941-1 P941-14 KLN 94 Signal Name GENERAL RS-232 OUT GENERAL RS-232 IN AIRCRAFT GROUND AV8OR Signal Name RS 232 RX RS 232 TX GROUND AV8OR Pin Out DB9-2 DB9-3 DB9-5 The wiring interconnect between the GNS 430/430W/530/530W and the AV8OR is as follows: GNS430/530 Signal Name GNS430/530 Pin Out GPS RS-232 OUT 1 GPS RS-232 IN 1 AIRCRAFT GROU
AV8OR User’s Guide Appendix CONNECTION TO AN EXTERNAL WEATHER SOURCE Bendix/King KDR-610 Setup To configure the AV8OR to receive weather data from the KDR-610, perform the following steps: soft key to open the From the Aviation Main Menu, tap the System Setup Menu. Highlight the Device Setup option and tap the SELECT soft key to show the Device and Port Setup page.
AV8OR User’s Guide Appendix The pinouts for the Bendix/King KDR 610 and the AV8OR are as follows: KDR 610 Signal Name 422TXH 422TXL GROUND KDR 610 Pin Out P6101-15 P6101-33 P6101-37 Pub. No D200803000008 AV8OR Signal Name RS 232 RX AV8OR Pin Out DB9-2 GROUND DB9-5 Page 7-8 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide Appendix WxWorx XM Weather Receiver Serial Setup To configure the AV8OR to receive weather data from the WxWorx XM Weather Receiver, perform the following steps: Attach the cable from the WxWorx XM Weather Receiver (supplied with the WX XM Weather Receiver) to the USB port on the AV8OR. soft key to open the From the Aviation Main Menu, tap the System Setup Menu. Highlight the Device Setup option and tap the SELECT soft key to show the Device and Port Setup page.
AV8OR User’s Guide Appendix WxWorx XM Weather Receiver Bluetooth Setup To configure the AV8OR to receive weather data from the Bluetooth version of the WxWorx XM Weather Receiver, perform the following steps: Setup the WxWorx receiver in the Device and Port Setup page as follows: 1. On the Main Menu page, tap the Aviation mode navigation program. soft key to start the 2. From the Map page, tap on the MAIN MENU soft key to go to the Aviation Main Menu. 3. Tap the soft key to open the System Setup Menu.
AV8OR User’s Guide 1. Appendix From the MAIN MENU, touch the SETTINGS soft key, and then touch the Blue Tooth soft key to display Figure 7-5. Figure 7-5: BlueTooth Main Page 2. Tap on the Icon to open the Bluetooth manager page as shown in Figure 7-6. Figure 7-6: BlueTooth Manager 3. Double tap on the “Explore a Bluetooth Device” option. This will initiate a search for other Bluetooth devices. While the search is in progress, the following page is displayed. Pub.
AV8OR User’s Guide Appendix Figure 7-7: BlueTooth - Search in Process 4. When the Wx Radio receiver and or other devices are found, Figure 7-8 is displayed: Figure 7-8: BlueTooth WxRadio Found 5. High light the WxRadio file and then touch the to access the device and display Figure 7-9. Pub. No D200803000008 Page 7-12 soft key Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide Appendix Figure 7-9: BlueTooth Passkey Required 6. Enter the Passkey supplied with your WxWorx receiver and then touch the “OK” soft key to display Figure 7-10. Figure 7-10: BlueTooth Service Browser Screen 7. Touch the “Bluetooth Serial Port” item to select it to display Figure 7-11. Pub. No D200803000008 Page 7-13 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide Appendix Figure 7-11: Bluetooth - Serial Port Found 8. Touch the “CONNECT” soft key to start the connection process, a message displays “Connecting ‘Bluetooth Serial Port’ service”. After the device is successfully connected, Figure 7-12 is displayed. Figure 7-12: BlueTooth Serial Port Connected. Pub. No D200803000008 Page 7-14 Revision July 2008. © Honeywell International Inc. Do not copy without express permission of Honeywell.
AV8OR User’s Guide Appendix EXTERNAL FLIGHT PLANS Jeppesen FliteStar© PC Application The AV8OR can use flight plans created by the Jeppesen FliteStar© PC application. Flight plans can be created and modified using the Jeppesen tool. The flight plans need to be saved using the “Export as Text” option, with the filename “Route.txt”. This file must then be transferred to the SD card and stored in the GoFly\data\user directory.
