Operation Manual

Honeywell Bendix/King AV8OR Handheld User’s Guide

VFR Moving Map Function D200803000008

Page 2-48 Rev 5 Mar 2012

Tap the MORE INFO soft key to see additional information about the

location. If additional pages are available, the NEXT INFO soft key

shows. When finished browsing the additional data, tap the CLEAR

soft key to return to the WayPoint Entry Screen.

Tap the OBS soft key to start an OBS course and show the

magnetic heading from your present position to the WPT

Tap the DIRECT TO soft key to accept the entered location. The

system sets a new course from the aircraft’s present position directly

to the entered WPT’s position and shows the new Direct-To course

on the Map.

Re-center aircraft when Direct-To is already enabled

Whe

n flyin

g on a course using the Direct-To function, if the aircraft

gets away from the course line on the map, the pilot can easily

create a new course line to the destination from the aircraft’s present

position by using the steps that follow:

Tap the soft key from the Map page to display the virtual

keyboard. The active Direct-To destination will already be filled in on

the keyboard.

Figure 2-56: Re-center aircraft – Step 1

Tap the Enter soft key to use the entered WPT and re-center the

course line from the aircraft’s present position to the destination.