Operation Manual

Honeywell Bendix/King AV8OR Handheld User’s Guide
D200803000008 Appendix
Rev 5 Mar 2012 Page 6-11
© Honeywell International Inc. Do not copy without express permission of Honeywell
WxWorx XM Weather Receiver Serial Setup
To configure the AV8OR to receive weather data from the WxWorx
XM Weather Receiver, perform the following steps:
Attach the cable from the WxWorx XM Weather Receiver (supplied
with the WX XM Weather Receiver) to the USB port on the AV8OR.
From the Aviation Main Menu, tap the soft key to open the
System Setup Menu.
Highlight the Device Setup option and tap the SELECT soft key to
show the Device and Port Setup page.
On the Device and Port Setup page, the configuration steps are:
• If the Position Source is set to Serial, it must be changed to
Internal or Bluetooth since there is only one RS232 port
available.
• Set the Weather Port to Serial.
• Set the Weather Type to “WxWorx”. When finished the Device
and Port Setup page should look like Figure 6-5.
Figure 6-5:
WxWorx XM Weather Setup
Refer to the XM Weather and Radio Setup section on page 4-6 for
information on how to activate y
our subscription to XM weather.