Operation Manual

Honeywell Bendix/King AV8OR Handheld User’s Guide
Automotive Mode Operation D200803000008
Page 3-110 Rev 5 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
• Taxi
• Bus
• Emergency vehicles
• Bicycle
• Pedestrian
Road Types Used for Route Planning:
Type Description
Motorways You might need to avoid motorways when you are
driving a slow car or you are towing another vehicle.
Unpaved
roads
GoDrive excludes unpaved roads by default: unpaved
roads can be in a bad condition and usually you
cannot reach the speed limit on them.
Toll roads
By default GoDrive includes toll roads (pay roads
where there is a peruse charge) in the routes. If you
disable toll roads, GoDrive plans the best toll-free
route.
Charge
roads
Charge roads are pay roads where you can purchase
a pass or vignette to use the road for a longer period
of time. They can be enabled or disabled separately
from toll roads.
Permit
needed
You might need a permit or permission from the
owners to use certain roads or to enter certain areas.
GoDrive excludes these roads from the route
calculation by default.
Ferries
GoDrive includes ferries in a planned route by default.
However, a map does not necessarily contain
information about the accessibility of temporary
ferries. You might also need to pay a fare on ferries.
Cross-
border
planning
In some cases the route calculated according to your
other navigation and route preferences would lead
through another country. If you wish to always stay
within the same country, turn this option off.
Carpool
lanes
This control appears only when navigating in the USA.
You should check whether you are allowed to use