Operation Manual
Honeywell Bendix/King AV8OR Handheld User’s Guide
Automotive Mode Operation D200803000008
Page 3-38 Rev 5 Mar 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell
Shutdown: If AV8OR is disconnected from an external power
source, AV8OR will automatically shut down after a set number of
seconds unless you tap the Cancel soft key.
ROUTE NAVIGATION
You can set up your route in GoDrive in several ways:
if you need a simple route (a route with only one destination, without
any intermediate via points), you can select the destination and start
navigating to it right away
you can plan a multi-point route (available in Advanced mode only)
you can also plan a route independently of your current GPS position
or even without GPS reception (available in Advanced mode only)
Selecting the Destination of a Route
GoDrive offers you several ways of choosing your destination and
via points (intermediate destinations):
• Use the selected location on the map.
• Enter a full address or a part of an address, for example a street
name without a house number or the names of two intersecting
streets.
• Enter an address with postal code. This way you do not need to
select the name of the settlement and the search for street
names might be faster as well.
• Use a coordinate.
• Use a saved location:
o A Favorite
o A POI
o The History of previously set destinations and waypoints.
Tip!
If you are going to use a route later, save it before you start
navigating. Tap the following soft Keys: , ,