Operation Manual

Honeywell Bendix/King AV8OR Handheld User’s Guide

D200803000008 System Setup Function

Rev 5 Mar 2012 Page 2-159

Tap the RESET COLUMNS soft key to set the column heading to

their factory defaults.

DEMO MODE SETUP

The data in the Demo M

ode Setup window Figure 2-207 is used to

control the starting po

sition, altitude, speed and initial track of the

simulator. You must select DEMO MODE on initial turn on to show

this menu selection See the Demo Mode section on page 2-4 for

ins

truc

tions on how to enable Demo Mode.

Figure 2-207: System Setup – Demo Mode Setup

Scroll up and down between the options, and set the values.

• Ident: Use the Ident field to assign a name to the Initial Position

(manual entry). Highlight the Ident and enter the Ident input

entry, the virtual keyboard is displayed. Input the Ident name

characters. The system will search for similar Ident names in the

database based on the character being input, as shown in the

figure below. As an example when the user inputs LOS ANG,

the system will display similar Ident names such as LOS

ANGELES/VAN NUYS. This function is convenient for the user

by finishing the input of the full Ident name. The user can also

define a new name for the Ident.