Operation Manual

Honeywell Bendix/King AV8OR Handheld User’s Guide

D200803000008 Auxiliary Function

Rev 5 Mar 2012 Page 2-143

Tap the EDIT soft key to edit data on a highlighted cell. Enter the

weight and the arm in each field of the Envelope page. Use the scroll

bar to view any fields that are not visible on the screen.

Tap the FILE soft key to save the displayed Weight and Balance

data to a file.

CREATING A NEW WEIGHT AND BALANCE SECTION

Use the following or

der of entry to create a new Weight and Balance

section for an aircraft.

1. Select the Profile tab and enter data for all of the fields.

2. Select the Envelope tab and enter the weight and the arm for

the number of envelope points that was entered in the Profile

tab.

3. View the C.G. Graph page and the Layout page and make sure

that they match your aircraft flight manual Type Certificate.

4. Select the Data Entry Tab and enter the Arm for each row that

shows. (Rows were defined in the Profile page)

5. Tap on the FILE soft key to save or create a new weight and

balance file. An Aircraft Profile pop up button shows. If no

Weight and Balance file has been created yet, only the CLOSE

and the NEW FILE soft keys show. If a file has already been

created, SAVE, LOAD and DELETE soft keys also show.

6. Tap on the NEW FILE soft key and enter the name of the new

aircraft profile into the data entry screen. Tap on the “Enter” key

to accept the aircraft profile name.

7. Tap on the SAVE soft key and the OK soft key to save the new

aircraft profile.

Multiple Weight and Balance aircraft profiles can be created for

different aircraft. After the aircraft profiles are created, use the FILE

soft key that shows on the “Data Entry”, “Profile” or “Envelope” tabs

on the Weight and Balance screen to display the “Aircraft Profile”

window. Select and highlight the aircraft profile you want to use and

tap on the LOAD soft key to load that profile into the current settings.