Users Manual

ALL
EFFECTIVITY
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Page 6-9
22 Apr 2019
23-15-49
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
ASPIRE-400
(g) Activation/Deactivation of Antenna Pass-through mode
(h) Activation/Deactivation of Power Amplifier Pass-through Mode.
F. Advanced Maint Level
(1) At the "Advanced" level, the ACD provides access to all the services provided at the
"Maint" access level.
(2) At the "Advanced" level, the ACD provides the following interactive access to
configuration of report generation:
(a) Selection of standard reports
(b) Selection of internal parameters
(c) Selection of internal messages
(d) Selection of report rate
(e) Selection of trigger
(f) Selection of reporting options
(g) Selection of storing of settings for activation on subsequent restarts.
(3) At the "Advanced" level, the ACD provides the ability to perform PIMBIT (when in a Dual
Channel Install - Class 6 / Class 7) including:
(a) Launching PIMBIT
(b) Displaying PIMBIT results as evaluated
(c) Aborting PIMBIT.
(4) At the "Advanced" level, the ACD provides the ability to perform the GPS Intermodulation
Test (when in a Dual Channel Install - Class 6 / Class 7) including:
(a) Launching the RF Carrier Test
(b) Displaying RF Carrier Test antenna and frequency settings
(c) Aborting the RF Carrier Test.
G. System Integration Test Level
(1) At the "Integration" level, the ACD provides the ability to:
(a) Select
(b) Indicate if preconditions are met
(c) Deselect
(d) Activate.
(2) The following mutually exclusive restricted test modes:
(a) MTR Test Mode
(b) Dual Channel Active
(c) Channel Card Side A in BTA mode
(d) Channel Card Side B in IBIT mode
(e) Functional Test Mode.
DRAFT
3rd rvw Draft as of:
29 January, 2020